PATONA Crystal Panel 100 Manual page 6

1. Purpose
This foldable and mobile solar panel is used for charging portable power stati-
ons and other devices.
Max. performance
Open circuit voltage VOC
No load current IOC
Max. mains voltage VMP
Max. current IMP
Conversion rate
Operating temperatur
Test result under standard conditions
STC
Size open
Size closed
Net weight
3. Operating Instructions
Correct oper positioning of the solar panel:
Unfold the solar panel and place it in a location and at an angle that will capture
the best possible solar radiation.
Hints:
» Ensure that all solar panels are exposed to direct sunlight and are not blocked
by shadows from buildings, trees or other objects.
»
placed at an angle of approx. 30-60°.
» Avoid damp or uneven surfaces, otherwise the panel may become deformed.
100W±5%
22.4V
6.0A
18V
5.4A
approx. 22%-25%
E=1000W/m² (test temperature
TC=25°C, air mass AM=1.5)
approx. 160 x 53 x 2cm
approx. 53 x 37 x 6cm
approx. 4100g
7
EN