L&L KILNS ONE-TOUCH Operation

OPERATION OF L&L KILNS WITH A ONE-TOUCH™ (Deg F)
Basic instructions are
printed directly on the
faceplate for easy reference.
Press the Enter button to
start the program you have
selected to fire.
Press and hold down Delay
to enter a countdown time
to delay the start of your
program.
Press and hold down Review
to see what program you
are running.

22. TABLE OF CONTENTS

1. WATCH THE VIDEO FIRST!
2. HOW YOUR KILN WORKS
3. TYPEFACE CONVENTIONS
4. NOTE ABOUT CONES
............................................................2
5. CONE 6 & CONE 10 VERSIONS
6. DEGREES CENTIGRADE
........................................................2
7. FIRST FIRING
..........................................................................2
7.1 FIRST FIRING IN ONE FIRING (16 HOURS)
7.1.1 START.
7.1.2 CHOOSE CUSTOM PROGRAMMING
7.1.3 PICK CUSTOM PROGRAM #1
7.1.4 MOVE THROUGH THE PROGRAM AND START
7.1.5 REVIEW PROGRAM
7.1.6 COMPLETE
7.2 FIRST FIRING IN TWO FIRINGS (2 x 9 HOURS)
8. TURNING ON THE KILN
.........................................................3
9. THREE MODES OF OPERATION
9.1 SIMPLE (Bisque or Glaze)
9.2 SIMPLE WITH CHANGES (Bisque or Glaze)
9.2.1 TO CHANGE A SIMPLE OPTION
9.2.2 EXAMPLE: CHANGE CONE OF BISQUE FIRE
9.2.3 EXAMPLE: CHANGE SPEED OF BISQUE FIRE
9.3 CUSTOM (Ramps and Holds):
10. RESETTING FACTORY DEFAULTS
11. HOW TO CANCEL A FIRING
12. STANDARD (SIMPLE) PROGRAMS
12.1 STANDARD BISQUE PROGRAMS
12.1.1 Slow Bisque (Default Bisque Program)
12.1.2 Medium Speed Bisque
12.1.3 Fast Speed Bisque
12.2 STANDARD GLAZE PROGRAMS
12.2.1 Slow Glaze
12.2.2 Medium Glaze (Default Glaze Program)
12.2.3 Fast Glaze
12.3 SIMPLE COOL DOWN SPEEDS
13. CUSTOM RAMP/HOLD PROGRAMMING
13.1 REUSE A PREVIOUS PROGRAM
one-touch-operation-deg-f,pdf
 2016 L&L Kiln Mfg, Inc. 505 Sharptown Rd, Swedesboro NJ 08085 P:856.294.0077 F:856.294.0070 service@hotkilns.com hotkilns.com
...................................................2
.....................................................2
...................................................2
.............................................2
......................2
...............3
...........................................3
..................................................3
.......................4
.............................................5
.....................................5
................................................5
.....................................5
....................................6
.....................................6
.......................................7
.............................7
.....................................7
13.2 CHANGING A PROGRAM (STEP BY STEP)
13.2.1 START
13.2.2 CHOOSE CUSTOM PROGRAMMING
13.2.3 PICK A PROGRAM
13.2.4 SPECIFY NUMBER OF SEGMENTS
13.2.5 ENTER RAMP RATE
13.2.6 ENTER HOLD TEMPERATURE
13.2.7 ENTER HOLD TIME
13.2.8 REPEAT STEPS FOR EACH SEGMENT
13.2.9 SET A DELAY (OPTIONAL - CAN BE SKIPPED)
13.2.10 START FIRING!
13.2.11 REVIEW PROGRAM
13.2.12 COMPLETE THE FIRING
14. KILN OPERATION DURING A
CUSTOM FIRING PROGRAM
14.1 DESCRIPTION
14.2 OPTIONS DURING FIRING
14.2.1 DISPLAYING THE CURRENT SET-POINT AND
ACCESSING THE FOLLOWING OPTIONS
14.2.2 SKIP STEP
14.2.3 ADD TIME TO HOLD PERIOD
14.2.4 ADD TEMPERATURE TO HOLD PERIOD
15. CUSTOM PROGRAMS
15.1 CUSTOM PROGRAM 1
15.2 CUSTOM PROGRAM 2
15.3 CUSTOM PROGRAM 3
15.4 CUSTOM PROGRAM 4
16. OPTIONS
..............................................................................10
16.1 ACCESSING OPTIONS
16.2 OPTIONS
..........................................................................10
16.2.1 SOUND: BEEPING ON OR OFF AT END OF PROGRAM
16.2.2 MAXIMUM TEMPERATURE
16.2.3 TEMPERATURE INDICATION
16.2.4 THERMOCOUPLE OFFSET
17. MESSAGES & DISPLAYS
18. ERROR CODES
19. SOFTWARE VERSION
20. CENTIGRADE INSTRUCTIONS
21. SPECIFICATIONS
REV: 12/1/16
The display area provides
lots of information such as
temperatures,
prompts, etc.
Choose one of either the
Bisque or Glaze programs.
They are preprogrammed for
immediate no hassle use.
Press for 5 seconds to bring
up easy options like cone,
heating & cooling rate and
hold time
The Custom option allows
more experienced users to
create and save four of your
own ramp/hold programs.
.....................7
.....................................................9
...................................................................9
...............................................9
........................................................10
....................................................10
....................................................10
....................................................10
....................................................10
....................................................10
...................................................11
...................................................................12
........................................................12
..........................................12
................................................................12
program
Page 1