Table of Contents
Advertisement
Quick Links
INSTALLATION/OPERATION/PARTS
In addition to installation information, this manual contains warnings, safeguards
and procedures on the use and care of the Series 4860 Meter-Register. Please
leave this manual with the meter owner after the installation is complete.
The information in this document is confidential and proprietary. No further disclosure shall be made without
permission from Gasboy International LLC Gasboy International LLC believes that the information in this document
is accurate and reliable. However, we assume no responsibility for its use, nor for any infringements of patents or
other rights of third parties resulting from its use. We reserve the right to make changes at any time without notice.
GASBOY INTERNATIONAL LLC LANSDALE, PA
SERIES 4860
METER-REGISTER
MANUAL
Rev. 03/07/03
INSTALLERS - IMPORTANT
Copyright 2003 by Gasboy International LLC All rights reserved.
035352
Advertisement
Table of Contents
Summary of Contents for Gasboy 4860 Series
- Page 1 The information in this document is confidential and proprietary. No further disclosure shall be made without permission from Gasboy International LLC Gasboy International LLC believes that the information in this document is accurate and reliable. However, we assume no responsibility for its use, nor for any infringements of patents or other rights of third parties resulting from its use.
- Page 2 Gasoline and petroleum products are flammable. To avoid injury or death to persons or damage to equipment or property, follow these listed warnings and other warnings and precautions outlined in this manual when installing, using, or working around this equipment. Check with GASBOY Technical Services for compatibility of liquids with pump materials.
-
Page 3: Installation
This meter is for consumer use only and not for re-sale. It is not sealable by Weights and Measures. All GASBOY meters are adjusted for accurate measure for diesel within + .05 gallons at the factory. However, since the conditions of the installation can affect pump accuracy, it is the responsibility of the installer to check the pump for accuracy and make any needed adjustments. - Page 4 GASBOY Model 4860 Meter For old style meters only, remove cap screw, exposing slotted head calibration screw. Use a narrow blade screw driver to turn the calibration screw clockwise to correct for plus cubic inches or counterclockwise for minus cubic inches in the test measure.
-
Page 5: Parts List
Do not depend upon the repair service of a general mechanic unless he is thoroughly familiar with the mechanism. GASBOY has a distributor network which services fuel dispensing equipment and management systems in every section of the country. -
Page 6: New Style
GASBOY Model 4860 Meter NEW STYLE (Mfr. after May 10,1995) 03/07/03... - Page 7 Installation/Operation/Parts NEW STYLE METER - MANUFACTURED AFTER 5-10-95 036341 Meter Register, US Gallons 036343 Meter Register, Liters 036400 Register Assy., US Gallons (Consists of items 1-18, 20-25) 036404 Register Assy., Liters (Consists of items 1-18, 20-25) Item Part No. Description Item Part No.
- Page 8 GASBOY Model 4860 Meter OLD STYLE (Mfr. before May 10,1995) 03/07/03...
- Page 9 Installation/Operation/Parts 036341 Meter Register, US Gas 036344 Meter Register, Liter Diesel 036342 Meter Register, US Diesel 036345 Meter Register, Imperial Gas 036343 Meter Register, Liter Gas 036346 Meter Register, Imperial Diesel 036400 Register Assy., US Gasoline (Consists of items 1-18, 20-25) 036401 Register Assy., US Diesel (Consists of items 1-18, 20-25) 036404...
- Page 10 SPECIFIC METER MODEL CONFIGURATIONS All flanged castings are interchangeable and can be mixed to match special requirements. Please consult the nearest Gasboy representative for special applications. All configurations shown on this page and the next page use the following parts list.
- Page 11 Installation/Operation/Parts 035888 Model 4860-4E For 90 Turn Piping Applications Register can be oriented to any of four 90 positions for proper reading to conform to piping requirements. 1" NPT inlet and outlet. 035936 Model 4860-4F For Electric Pump Applications Inlet flange offset to tip register back 15 from vertical for convenient reading.
- Page 12 GASBOY Model 4860 Meter METER BREAKDOWN/FILTER Item Part No. Description 044512 Pipe, 1 x 1-3/4” 003044 Filter Adapter, 1” 026005 Filter, 7 Micron, Particulate only 026015 Filter, 30 Micron, Water and Particulate 026042 Filter, 10 Micron, Water and Particulate 025909...
-
Page 13: Warranty
Parts Only - During the warranty period, Gasboy will, at its option, repair or replace defective parts returned transportation prepaid to its factory.
Need help?
Do you have a question about the 4860 Series and is the answer not in the manual?
Questions and answers