Grille Installation; Removing And Installing Grille - U-Line U-29RB-13A User Manual & Service Manual

USER GUIDE

Grille Installation

REMOVING AND INSTALLING GRILLE

!
WARNING
Disconnect electric power to the unit before
removing the grille.
When using the unit, the grille must be installed.
!
WARNING
DO NOT touch the condenser fins. The condenser
fins are SHARP and can be easily damaged.
Removing the grille
1. Disconnect power to the unit.
2. Remove control knob (4).
3. Loosen the two screws (1).
4. Remove grille (2) and grille cap (3) from unit.
Installing the grille
1. Make sure grille cap (3) is behind grille in slots
provided in grille before attaching grille to unit.
2. Align cabinet and grille holes and secure, but do not
over tighten grille screws (1).
3. Install control knob (4) if equipped.
4. Reconnect power to the unit.
Grille Installation
3
12
1
4 2