Advertisement
Installation
Application height:
Pole Diameter 30-40mm: 4-6m
Pole Diameter 48-60mm: 7-11m
1
Take the product out of the packing box.
2
Connect the power cord.
60245 IEC57 3X1.0(~1.5)mm2
8
12~15
1. Always use IP66 or higher IP rated junction box/connector for wiring connection.
2. The Luminaire should never be used in submerged wet conditions e.g. under water, soil, snow etc.
3. The wiring connection should also never be used in submerged wet conditions
e.g. water, soil, snow etc. OR must use IP68 junction box.
4. The warranty is void, in case any of the instructions / guidelines are not followed as per given mounting instruction.
5. This product is not supplied with any junction box / connector.
6. 6. Fo further clarification, please contact the manufacturer.
BRP330-335
Mounting Position: Horizontal
Cable Diameter: 8-12mm
Pole Size:
30-40mm diameter up to 45W
48-60mm diameter above 45W
Min.100
Product side
Male connector
Power input cable
Female connector
3
Fix the street light over the pole and tighten the bolts.
2-M8 (8N.m)
2-M10 (17N.m)
4
Luminaire is ready for use.
CAUTION:
Do not open front cover when connection power.
Broken Glass/front diffusers should be immediately replaced.
Tighten the screws, alternately and evenly.
Advertisement
