Summary of Contents for New Image FITT STRIDER
- Page 1 FITT STRIDER ASSEMBLY AND U SE R GU I DE DOWNLOAD THE DOWNLOAD THE NEW IMAGE FITNESS NEW IMAGE FITNESS APP TODAY APP TODAY To help you get started visit: To help you get started visit: newimagefitness.co.uk...
- Page 2 We know getting started is sometimes the hardest part so we design all our products to be simple, fun to use and effective. We hope you enjoy your new FITT Strider and would love to hear your experiences. Check out our social channels and take a look at YouTube for videos, tips and workouts.
- Page 4 Congratulations on purchasing your new FITT Strider! The FITT Strider by New Image is a compact, heart-pumping, cardio workout without all the upright elliptical cross trainer that delivers impact on your joints. It’s the perfect way to total body results for all experience levels.
- Page 5 WHAT’S IN THE BOX: Fixings & tools QUICK-START GUIDE: Step 1 Insert the spring locking knob through 1 of the 3 respective holes to set the incline level of the machine. The higher the hole, the higher the incline. Note: Ensure the main frame is standing safely. The unit will be unstable at this stage...
- Page 6 Step 2 Using the supplied Allen Key #5 (105), lock the front stabiliser leg on to the main frame by inserting the 4 Spring washers (73), Flat washers (66) & M8 Bolts (50) Using the Allen Key #5 again, lock on the rear stabiliser leg by inserting 4 spring washers (73), Flat Washers (66) and M8 Bolts (51) Next, lock the side of the rear stabiliser leg using Allen Key #6 (104) to tighten M10 Bolt (46) &...
- Page 7 Step 4 Using Allen Key #6, lock the connector bars (E) to the corresponding moving handle bar and pedal frame with the 4 M8 bolts (56) Unfold the pedal bars until they are at a 90 degree angle. Using Allen Key #6 (104) and Multi Wrench (106) lock the pedals into place using M10 Bolt (64) and M10 nut (63).
- Page 8 Step 7 Using supplied Multi wrench (106) & Allen Key #5 (105), place the middle handle bar (D) onto the bracket on the upright frame. Insert M8 Bolt (45) through the front side and secure tightly using the M8 curved washers (83) & M8 nuts (80). First, remove the 4 screws (58) that are pre-assembled on the back of the Computer (90) and set the aside temporarily.
- Page 9 OPERATING THE MONITOR DISPLAY: HEIGHT: Displays estimated height. GEAR: Displays estimated incline value from level 1 to level 3. DISTANCE: Indicates the simulated distance that has been ‘run’ SPEED/TIME: Displays speed and time when exercising CALORIES/PULSE: Displays estimated calories burnt and pulse rate whilst exercising BUTTONS: [RESET] clear data from selected mode.
-
Page 10: Safety Information
SAFETY INFORMATION • Please read this user guide before first using your Fitt Strider training equipment. It is important to keep these instructions for future reference. • Assemble and operate the equipment on a level surface. • Ensure the equipment is stable before use. -
Page 11: Maintenance And Storage
• Product dimensions: Length 1050mm x Width 650mm x Height 1735mm. • Please note the Fitt Strider is not equipped with a free wheel and therefore the moving parts cannot be stopped immediately. • WARNING! - This stationary training equipment is not suitable for high accuracy purposes. - Page 12 1. Moving the Machine To move the machine lift up the rear stability leg until the wheels on the front stability make contact with the ground as shown in the diagram below. With the wheels on the ground you can transport the unit to the desired location.
- Page 13 2. Surrounding distance When operating the machine, always ensure a minimum distance of 0.6m around all surround edges of the product. This will ensure a safe exercise space is maintained.
- Page 15 NEW IMAGE FITNESS APP connected fi tness DOWNLOAD THE NEW IMAGE FITNESS APP TODAY Track your fitness & access all your workout videos for our New Image range wherever & whenever you want!
- Page 16 DOWNLOAD THE NEW IMAGE FITNESS APP TODAY! To access all your workout videos wherever & whenever you want! Distributed by: High Street TV, PO Box 7903, CORBY, NN17 9HY Version V2 04/22...