Page 1
Name of Equipment : Smart Scanner Model : IO180-IH Manufacturer : Infocar Co., Ltd. FCC ID : 2A66XIO180IH Connection Type : Bluetooth LE 4.0, Bluetooth Connectable Terminals : Android, iOS smartphone(tablet) Rated Voltage : 12V Operating Temperature : -40°F - - 185°F...
Page 2
Functions [Driving Style Analysis] a. Analyzes driving records through Infocar algorithm. b. Check your safe/economical driving scores and rankings. c. Check your driving style based on statistical graph and driving records. [Abnormal Driving Detection] a. Detects the fault codes caused by problems of vehicle's sensors or system in real-time.
How to Install When the car is turned off, attach the terminal to OBD socket shown above, and start the car (red LED light is up when installed normally). Fuse box and terminal box should be removed from the cover. If the OBD socket is located on a pedal or other location that you cannot see, please use a flash for installation.
Connection Bluetooth Setting Click “Connect” on the top right corner and move to Bluetooth connecting page.
Page 7
Bluetooth LE 4.0 as a connection type and click Infocar180 in the Bluetooth list below. You have to connect through Bluetooth not from the smartphone setting, but from Infocar application. Connection may take time depending on the smartphone OS or model.
Page 8
[AutoRun – Android] 1. Check if you have allowed Infocar to access location. 2. When the engine turns on, Infocar application would be automatically turned on and driving records would be saved. 3. If you can’t autorun Infocar, check if the smartphone and vehicle Bluetooth is well connected.
Page 9
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.