Advertisement
Step Four
Place the Swivel Cover (E)
over the Base Pole (D).
lmportant Notice:
Pay attention to the size of
the middle hole in the
Swivel Cover (E).
Side A is +/- 1.6" and
Side B is +/- 2".
Side B on the Swivel Cover (E)
and the locking hole on the
Base Pole (D) must be on
the same side.
Step Five
Attach the Solar Panel (F) on the top of Main Parasol (A).
1
Firmly but carefully connect the plug on
the Solar Panel with the socket on the top of
the parasol. Do not pull on wires as doing so
may permanently damage the connections.
3
Before the first use, ensure the Solar Panel
receives at least 8 hours of direct sunlight to
charge the batteries.
Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
3.5M Solar LED Overhanging Parasol
With 100kg Water Fillable Base
Assembly Instructions
Locking Hole
E
B
2
Align the notches on the Solar Panel with
the grooves on the top of the parasol, hide
the plug and wires inside the hollow space.
Turn the Solar Panel clockwise to lock
into place, do not over-tighten.
IMPORTANT:
The Solar Panel has a protective film
to prevent damage during shipping.
Remove the plastic film on the
Solar Panel. Failure to remove the film
will result in the Solar Panel not
functioning properly.
www.royalcraft.co.uk
Side A
Side B
7 / 13
Advertisement
