Page 3
. PROTECT A/S is a wholly Danish-owned firm, with production facilities in Aarhus – the second-largest city in Denmark. The company is the world’s biggest manufacturer of Fog Cannon ™ products for burglary protection, and distributes to more than 50 countries .
IMPORTANT INFORMATION FOR USERS Before use Have you and/or others been instructed in the correct use of the alarm system and fog protection set-up? Before the alarm fitter leaves the premises, all users should have re- ceived instruction in how the security fog system works .
An authorised alarm fitter must be engaged to set the fogging time, etc. and to replace the fog fluid container (however, end users themselves can replace the fluid container in PROTECT QUMULUS ® models manufactured after 1 September 2014). The same as for model Xtratus ®...
For additional details, see pages 10 and 11. End users themselves can change the fluid container in PROTECT QUMULUS models manufactured after 1 September 2014. The same ®...
. You can see the certificates online at www.protectglobal.com. At the same time, PROTECT products are so operationally stable ™ and reliable that they come with a warranty of five years*.
‘beeps’) and visual signals (flashing yellow LED on the front panel) when the fluid level is low. Overview of LED signals: • The green LED flashes when the fog cannon is connected to a power supply. The green LED lights constantly when the Fog Cannon ™...
Fog Cannon ™ in front of the We recommend that you maintain a safety distance of at least 35 cm. PROTECT Fog Cannon units ® are IP approved for indoor use and must therefore not be exposed to water and moisture .
PIR sensor is to be installed Fog Cannon ™ per fog cannon. Sensors of this kind ensure that the only generates fog when both the alarm system and the verifying sensor receive a signal. In this way, it is possible to trigger the Fog Cannon ™...
– NEVER enter a ‘fogged’ area until visibility permits. If appropriate, wait until security personnel have checked and secured the premises . Fog Cannon ™ Always air premises for at least 20 minutes after a has been activated . We recommend airing premises within one hour Fog Cannon ™...
60–80 W, which corresponds to the consumption of a conventional light bulb . Failure to comply with the guidelines laid down in these instruc- tions will result in PROTECT A/S waiving all liability for any consequences of same .
Page 13
IMPORTANT INFORMATION FOR USERS All certificates, CE declarations, product approvals, etc. are published online at www .protectglobal .com For additional information, contact the alarm company that fitted the fog cannon, or visit www .protectglobal .com...
Need help?
Do you have a question about the Fog Cannon and is the answer not in the manual?
Questions and answers