Transporting Sensitive Components; After Working Inside Your Computer; Bitlocker - Dell Vostro 16 5630 Service Manual

Hide thumbs Also See for Vostro 16 5630:
Table of Contents

Advertisement

ESD protection summary
It is recommended to use the traditional wired ESD grounding wrist strap and protective anti-static mat at all times when
servicing Dell products. In addition, it is critical to keep sensitive parts separate from all insulator parts while performing service
and that they use anti-static bags for transporting sensitive components.

Transporting sensitive components

When transporting ESD sensitive components such as replacement parts or parts to be returned to Dell, it is critical to place
these parts in anti-static bags for safe transport.

After working inside your computer

About this task
NOTE:
Leaving stray or loose screws inside your computer may severely damage your computer.
Steps
1. Replace all screws and ensure that no stray screws remain inside your computer.
2. Connect any external devices, peripherals, or cables you removed before working on your computer.
3. Replace any media cards, discs, or any other parts that you removed before working on your computer.
4. Connect your computer and all attached devices to their electrical outlets.
5. Turn on your computer.

BitLocker

CAUTION:
If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it
will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress, and
the system will ask for this on each reboot. If the recovery key is not known this can result in data loss or
an unnecessary operating system reinstall. For more information about this subject, see Knowledge Article:
updating the BIOS on Dell systems with BitLocker
CAUTION:
If BitLocker is not suspended, replacing parts like system board or storage drives on a system with
BitLocker / Device encryption enabled will also trigger the encryption and lock the user out. The recovery
key is required to regain access to Windows. The recovery key is automatically saved to the user's Microsoft
Account (MSA) when the device is encrypted and can be retrieved from
devices/recoverykey
For more information, refer to Windows Support article:
enabled.
Finding your BitLocker recovery key in Windows
https://account.microsoft.com/
Working inside your computer
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

P117f

Table of Contents