Advertisement
Plug the power into a mains socket. Turn the control knob on
the front of the Humidifier in a clockwise direction to commence
operation, a blue light on the water level indicator will come on
and mist will begin being produced from the top of the Humidifier.
To adjust the mist output turn the control knob on the front of the
Humidifier to the desired level. To turn the machine off, turn the
control knob in an anti-clockwise direction as far as it will go, the
blue indicator light will turn off.
Please note that if your Humidifier runs out of water it will stop
working until the water tank is refilled.
To ensure your Humidifier continues to work at the best of its
capability it is important to clean and maintain it regularly, especially
if you are in a hard water area. We recommend using distilled or
de-mineralized water as tap water can contain minerals that will
create deposits inside your Humidifier and can affect its operation.
Clean the base by removing the water tank and partially
Fill here
filling the cavity with 8-oz undiluted white
vinegar (see diagram 1). Leave this solution
in the base for 20 minutes. Clean the inside
of the tank by half filling it with hot water,
add half a cup of white vinegar, then replace
the tank cap and shaking vigorously for one
minute. Pour the solution away and rinse the
tank thoroughly twice. After 20 mins pour
away the vinegar solution from the base and
gently scrub the area around the transducer and cavities in the
base with a soft brush to remove any deposits. Rinse all parts twice
with clean warm water.
Advertisement
