Safety Precautions - Hisense AH-200NH4GHB Installation & Operation Manual

Please make sure you have read at least one chapter of safety precautions shown in
the manual. This part provides quite important safe points for you and please
operate it based on safety precautions.
1. Household electrics must have a reliable earth
connection.
2. This product must be protected with a residual
current device of adequate rating.
3. Do not interfere with any permanent instruction,
labels or warning plate attached to the external
cover of this heat pump.
4. This product must only be installed by qualified
personnel in the mechanical and electrical industry.
5. Always comply with local wiring regulations.
6. Always engage with a trained professional to relocate this product after it has
been professionally installed.
7. Maintenance and repair work must only be undertaken by trained and qualified
personnel.
8. The electrical connection to this product must be via a 20A RCD/MCB or RCBO
with a test button function.
9. The final electrical connection must be via a double pole isolating switch located
close to the unit. The isolating switch must never be covered up.
10. A One-way isolating valve must be installed on the cold water supply pipe for
maintenance purposes.
11. This appliance should never be used by children.
12. If the power supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified personnel in order to avoid a hazard.
13. Do not operate this heat pump in a wet room such as a bathroom or unless it is
housed in a separate cupboard within that room.

Safety Precautions

HI-WATER R290
Heat Pump Water Heater
- 3 - / 44