Olympus E-PM1 Instruction Manual page 97

Monitor
indication
m
The internal temperature of
the camera has risen due to
Internal camera
sequential shooting.
temperature is too
high.
Please wait for
cooling before
camera use.
The battery is drained.
Battery Empty
The camera is not correctly
connected to a computer, printer,
HDMI display, or other device.
No Connection
There is no paper in the printer.
No Paper
The printer has run out of ink.
No Ink
The paper is jammed.
Jammed
The printer's paper cassette has
been removed or the printer has
Settings Changed
been manipulated while making
settings on the camera.
There is a problem with the
printer and/or camera.
Print Error
Pictures recorded on other
cameras may not be printed on
this camera.
Cannot Print
The lens is locked.
The lens of the retractable lens
Please extend the
stays retracted.
lens.
An abnormality has occurred
Please check the
between the camera and the
status of a lens.
lens.
Possible cause Corrective action
Turn off the camera and wait for
the internal temperature to cool.
Wait a moment for the camera
to turn off automatically. Allow
the internal temperature of the
camera to cool before resuming
operations.
Charge the battery.
Reconnect the camera.
Load some paper in the printer.
Replace the ink cartridge in the
printer.
Remove the jammed paper.
Do not manipulate the printer
while making settings on the
camera.
Turn off camera and printer.
Check the printer and remedy any
problems before turning the power
on again.
Use a personal computer to print.
Extend the lens. (P. 14)
Turn off the camera, check the
connection with the lens, and turn
the power on again.
11
EN 97