Leaf+Bean DLE0138 Instruction Manual

Electric Kettle
DLE0138
Instruction Manual
Thank you for choosing the Leaf & Bean
Electric Kettle.
To ensure proper operation and to maintain the
lifespan of your appliance, please read these
instructions carefully before first use.

Features and Parts

A. Lid
B. Handle
C. Stainless Steel Body
D. On Switch/Indicator Light
E. Power Base
A
E

Technical Parameters:

Voltage/Frequency
Power
Capacity

Safety First

• Please read these instructions carefully
before using the appliance.
• Make sure the outlet voltage is corresponding
to the voltage stated on the rating label of this
appliance.
• The power cord should not be hung over the
edge of any table or touch a high temperature
surface. Please try to prevent any damage to
the power cord.
• The kettle will not move when working.
• Unplug the power cord and let the kettle cool
before cleaning.
• If the power cord is damaged, it must be
replaced by either the manufacturer or
its maintenance department, or similar
professional personnel.
• This kettle is not suitable for children,
disabled people, or anyone who is not familiar
with the appliance.
• This appliance cannot be used outdoors.
• If the electric kettle is too full, boiling water
B may overflow.
• Use this kettle only on the matching base.
• Please keep these instructions for future
reference.

Before First Use:

C
Pour a decent amount of water into the kettle
(not exceeding the maximum water level), boil
and discard. Repeat this step twice before
D
boiling water for drinking.

Using Your Kettle:

• Open the lid and fill the kettle with water to
your desired level.
• Please Note: The amount of water is strictly
prohibited from exceeding the maximum scale
and must not appear below the minimum scale.
If it exceeds the maximum scale, boiled water
may overflow and spill out, causing an injury.
220-240V~50/60Hz
1000-1200W
800ML