Advertisement
Quick Links
UNPACKING INSTRUCTIONS
WARNING
SAFE UNPACKING
Please follow the instructions for safe unpacking of your garden building
Two people required
•
Please read though the instructions before attempting to build the product.
•
Position the pallet on firm level ground
•
Cut the plastic banding
•
Unpack the pallet by removing the screws from one panel at a time as shown.
Empire Sheds cannot take responsibility for your safety while handling this product.
Image for illustration purposes only, your shed may vary
Apex Summerhouse
Instructions
Advertisement
Related Manuals for Empire Apex Summerhouse 5060659536980
Summary of Contents for Empire Apex Summerhouse 5060659536980
- Page 1 Image for illustration purposes only, your shed may vary • Unpack the pallet by removing the screws from one panel at a time as shown. Apex Summerhouse Instructions Empire Sheds cannot take responsibility for your safety while handling this product.
- Page 3 2. Door Timber a. Lie the doors into the door frame on a flat surface with As timber is a natural product it is prone to changes in appearance during different ..the cladding facing upwards, ensuring that the doors are weather conditions, including swelling, warping and splitting.
- Page 4 4. Front and Top Gables a. Pick out one of the 4ft panels that will be part of the gable end of your shed and place this on top of one of the heavy-duty floor bearers and line it up so that it is flush with the side of the floor.
- Page 5 5. Apex supports For sheds with more than 2 roof panels in length, position the apex supports so that the roof panels sit halfway across each support, fix with 50mm screws. Ensure that the finished For sheds with multiple roof boards, attach roof will overhang the gable ends equally.
- Page 6 6. Roof felt 13mm Nails 13mm Nails c. Finally, attach the cover trim to all corners and all joins between panels using 4x 40mm nails for each strip, as shown. 40mm Nails a. Starting with the lower part of the roof, attach the felt using the 13mm clout nails ensuring that there is a 30mm overhang around the edge.