LipRouter H7 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

LipRouter

User Manual

REV 1.1

Table of Contents

Need help?

Do you have a question about the H7 and is the answer not in the manual?

Questions and answers

Summary of Contents for LipRouter H7

Page 2: Table Of Contents
Table of Contents 1. Hardware Specifications________________________________________________________ 1 1.1 Packing List_____________________________________________________________1 1.2 Device Parameters________________________________________________________1 1.3 Plan___________________________________________________________________ 2 1.4 Interface Diagram________________________________________________________ 2 2. Installation and Commissioning__________________________________________________ 3 3. Software Functions____________________________________________________________ 4 3.1 Boot Interface___________________________________________________________ 4 3.2 Setting Interface_________________________________________________________ 5 3.3 Account Management_____________________________________________________ 5 3.4 WIFI Management_______________________________________________________ 6 3.5 WAN Management_______________________________________________________ 7 3.6 LAN Management________________________________________________________7...
Page 3: Hardware Specifications
1. Hardware Specifications 1.1 Packing List Number Actual Name/Model Package Specification Remarks of pieces number Device Carton Packing LipRouter H7 Antenna Carton Packing Standard Power Cable Carton Packing Standard Power Adapter Carton Packing Standard Warranty Card Nagasoft Carton Packing Certificate...
Page 4: Plan
Dual DC redundant power supply, intelligent power supply switching, Supply Voltage 10V-20V wide voltage input, support battery power supply Screen 5-inch touch screen Hot Shoe Built-in bottom，1/4-20 Size 187*126*43.5mm Weight 0.6KG Operating 0℃ - 45℃ Temperature Anti-vibration 5.5~200Hz 1.3 Plan 1.4 Interface Diagram 6 USB ports 1/2/3/4 = WIFI antenna interface...
Page 5: Installation And Commissioning
Use a network cable from the Internet to the WAN interface of the LipRouter. Switch on the power switch of the LipRouter to start the device. As shown below: After entering the main interface, please click the "Settings" icon button in the lower right corner to enter the setting interface.
Page 6: Software Functions
WIFI hotspot or the wired interface to the LAN interface 13. After used, turn off the power of the LipRouter, remove the connected network cable, USB 4G network card, WIFI antenna, and put the main device and power adapter into the box.
Page 7: Setting Interface
3.2 Setting Interface The setting interface provides WIFI settings, WAN settings, LAN settings, Bonding account settings, Speed test, and (device serial number, upgrade, etc.) interfaces. The interface is shown below: Click button in the lower right corner to return to the main interface. 3.3 Account Management Click the "Bonding Account"...
Page 8: Wifi Management
After logging in, you can get the type of bonding account and traffic usage information. Click button at the bottom to return to the main interface of settings. 3.4 WIFI Management Click the "WIFI" button on the settings interface to enter the WIFI management interface, as shown in the figure below: In the WIFI management interface, you can customize the WIFI network name and network password.
Page 9: Wan Management
3.5 WAN Management Click the "WAN" button on the setting interface to enter the WAN setting interface, as shown in the figure below: In the WAN setting interface, you can choose to assign IP dynamically or set IP manually; after selecting the “Static IP” setting, please enter IP address, mask, gateway and DNS manually. Click “Apply”...
Page 10: Network Speed Test
3.7 Network Speed Test Click the "Speed Test" button on the setting interface to enter the network speed test interface, as shown in the figure below: On the network speed test interface, the current bonding network can be tested in real time, and the speed test can be started and stopped separately.
Page 11 Click "Reboot" to pop up the restart device prompt interface, and click "Confirm" to implement soft reset device, as shown in the figure below: Click “Factory Reset” to pop up the restore factory prompt interface, click “Confirm” to restore the parameters to the original factory state, as shown in the figure below:...
Page 12: Screen Lock
3.9 Screen Lock Users can click the ‘Lock’ button to lock the screen for safety issue. The screen will be fully locked in case of careless touch. To unlock the screen, you need to click the unlock button to the below page, and click 1 to 5 in numerical order.
Page 13 A:Go to https://lipmallcdn.nagasoft.cn/ to register and purchase data package Q: Can I access the Internet by plugging in a single network card? A: If you don't log in bonding account, you can use a single card network access the Internet under normal circumstances.
Page 14 WAN port is connected to the external network, the devices in this LAN can discover and access each other. Q: The computer is connected to the LAN port of the LipRouter. Why can't connect to Internet? A: Check if there is a problem with the line. Check whether the computer has fixed IP before. Set the LipRouter to automatically obtain IP, or the computer can fix the same network segment as the LipRouter.