Dalbach KGK145-F Instruction Manual page 33

5. Remove the pin from the bottom bracket and insert it into
the bracket on the opposite side.
6. Place the lower appliance door on the pin of the lower
bracket.
7. Close the appliance door carefully.
8. Fix the middle angle bracket and the middle hinge with
the two screws.
9. Insert the pin of the middle hinge at the top on the
fixture of the lower appliance door.
10. Place the upper appliance door on the pin of the middle
hinge.
11. Close the upper appliance door carefully.
12. Release the pin from the upper hinge
13. Turn the hinge by 180° and reinsert the pin.
14. Insert the pin of the upper hinge in the fixture of the
upper appliance door.
15. Align appliance doors horizontally and vertically.
16. Make sure that the seals close well.
17. Readjust the hinges if necessary.
APPLIANCE DAMAGE!
To avoid appliance damage, observe the following:
• Stand the appliance upright again after swapping the hinges.
• Check the exact fit of the appliance door seal and the appliance door.
• Reconnect to the mains power supply after three hours at the earliest.
Changing the door hinge
Page | 33