Vericon Systems BXA Installation Instructions

BCM
Remote Cellular Boiler Diagnostics Device
Pack Contains: 1x BCM
Device Information
BCM
Model: BXA
Supply Voltage: 230V AC 50Hz
Boiler Connection: 0-24V DC
AFV Connection: 0-6V DC
2G / NBIOT / CAT M1 Connected
Designed in the UK
Vericon Systems
Unit 5, Churchill Industrial Estate,
Churchill Road, Cheltenham,
GL53 7EG
www.vericonsystems.com
Support: support@vericonsystems.com
Made in China
Safety and Guidelines
BCM should only be installed by a competent person.
ALWAYS ISOLATE THE MAINS
SUPPLY BEFORE INSTALLING
!
OR WORKING ON ANY
COMPONENTS THAT REQUIRE
A 230V AC SUPPLY
BCM is intended for internal use only.
BCM requires a mobile GSM signal to operate.
BCM should be installed in a location with strong GSM
signal. A GSM Signal strength analyser can be used to
test the signal strength.
Compatibility
BCM works with all three major bus protocols; eBus,
EMSBus and OpenTherm.
For a list of compatible boilers, contact your Vericon
representative.
Installation
1. Scan the QR Code on the device to begin the
installation and commissioning.
If the code cannot be scanned, visit app.vericon.co.uk to
input the serial number and begin the install and commissioning.
2. Isolate the main supply
ALWAYS ISOLATE THE MAINS
SUPPLY BEFORE INSTALLING
!
OR WORKING ON ANY
COMPONENTS THAT REQUIRE
A 230V AC SUPPLY