Table of Contents
Advertisement
Quick Links
Congratulations! You must be the proud owner of this DINOmite teepee
tent! You're just moments away from having your very own prehistoric
play area. So let's get started!
Teepee tent
Step 1: Connect the Poles
Add 1 top, 2 middle and 1 bottom pole using 3 plastic connectors. Repeat until all 4 poles are
completed. If one rod doesn't quite fit into a connector, no stress, just try another rod. Please
contact us if you need replacements - www.winstonolive.com.
Step 2: Insert Poles into Canvas
Take one completed pole and insert into the bottom of the teepee sleeve, pushing it up to the top.
Repeat with all 4 poles.
Step 3: Tie Poles Together
Thread the string through the pole and then tepee, alternating as you go. Pull on the ropes.
T E E P E E
CONTENT
4x top poles
8x middle poles
Teepee mat with roar
button attached to floor
ASSEMBLY
T E N T
12x screw-in connectors
Tent & pole
bag
4x bottom poles
LED lights with
remote control
Advertisement
Table of Contents
Related Manuals for Winston & Olive DINOmite Teepee Tent
Summary of Contents for Winston & Olive DINOmite Teepee Tent
- Page 1 T E E P E E T E N T Congratulations! You must be the proud owner of this DINOmite teepee tent! You’re just moments away from having your very own prehistoric play area. So let’s get started! CONTENT 4x top poles 4x bottom poles 8x middle poles 12x screw-in connectors...
- Page 2 Spread out Teepee legs ensuring the poles fall in one similar direction (eg clockwise so it is concentric. Pull on the ropes. Tie up tight. Activate Dinosaur ROAR button pull tab • Slide button out of pocket on tent floor and remove the plastic battery tab at the back of the button;...
Need help?
Do you have a question about the DINOmite Teepee Tent and is the answer not in the manual?
Questions and answers