Page 1
Fold Electric Assist Bicycle User Manual Please read this manual carefully before assembling or operating. www.ridevoltag.com MANN-715020BLK-01 2021-10-14...
Voltag Fold Introduction Fold Whether you have purchased a Voltag e-bike for commuting to work, a lengthy expedition or a leisurely ride, we have taken the necessary steps to create an Item and affordable e-bike that will make every trip a memorable one.
Fold www.ridevoltag.com series Display Operation Assembly Steps The bike battery must be charged for the display to function 1: Open the box and then unfold the bike as per the following steps. Turn on the display and bike by pressing the POWER button located on the side of the display.
Step 2: Open the folding buckle of the head tube and fold down. Step 3: Pedal assembly d as displayed in the picture. Step 3: Open the frame fold clamp, fold the frame and connect magnet to metal plate.
The Voltag Fold bike is designed to be ridden on paved roads or surfaces only. The bike is not designed to withstand off-road conditions or uneven terrain. Voltag assumes no liability for any For replacement parts, technical information, and warranty assistance, please visit ridevoltag.com.
Fold www.ridevoltag.com series Maintenance PEDAL ASSIST: When you are in PAS mode – Do not pedal around corners – you will get a boost and your pedal will hit the ground and can cause injury or death! Do not use pedal assist on level Lubricating parts (see below table) and downhill grades if people are visible on the path or boardwalk.
Fold www.ridevoltag.com series Charging your bike The red indicator light on the charger will light up when the bike is charging. Average charging time: 5-6 hours, depending on the ambient temperature. Note: please stop charging when the temperature of battery is more than 40°C.
Fold www.ridevoltag.com series Troubleshooting Users can do self-checking and troubleshooting when experiencing below situations. Problem Possible Cause Corrective action Problem Possible Cause Corrective action The power indicator on The voltage of the battery is in The brake system is locked or...
Fold www.ridevoltag.com series Error codes Notes Error code Error description Corrective action The display cannot receive the data 1. Check that the TX, RX from the controller or the data received communication line is connected is error. Communication fault correctly.
Need help?
Do you have a question about the Fold and is the answer not in the manual?
Questions and answers