Related Manuals for SCUBACAM SCU-30
Summary of Contents for SCUBACAM SCU-30
- Page 1 SCUBACAM LTD. SCU-30 Manufactured by: Scubacam Ltd. Unit 8, Battlerswells Farm, Jackets Lane, Harefield, Middlesex UB9 6PZ Tel: +44 (0)1923 822 872 E Mail: sales@scubacam.net Website: www.scubacam.net...
-
Page 3: Table Of Contents
Limited One-Year Warranty A digital (.pdf) version of this manual can be found on our website at www.scubacam.net/downloads Manufactured by: Scubacam Ltd. Unit 8, Battlerswells Farm, Jackets Lane, Harefield, Middlesex UB9 6PZ Tel: +44 (0)1923 822 872 E Mail: sales@scubacam.net Website: www.scubacam.net... -
Page 4: Introduction
The materials used in manufacture can be affected by heat, ozone, and ultraviolet light. This appears as surface cracking on areas under stress. Therefore, it is important not to expose your Scubacam splash housing to these conditions for prolonged periods. -
Page 5: Technical Data
LEMO 4 pin underwater connector, split to BNC video (Where fitted) connector for video and D-Tap for power Manufactured by: Scubacam Ltd. Unit 8, Battlerswells Farm, Jackets Lane, Harefield, Middlesex UB9 6PZ Tel: +44 (0)1923 822 872 E Mail: sales@scubacam.net Website: www.scubacam.net... -
Page 6: General Care
DO NOT clean with strong chemicals. Clean the front port regularly with the supplied cleaner and re-coat with polymer. It is recommended to return the housing to Scubacam at least once per year to ensure the housing remains in acceptable condition Manufactured by: Scubacam Ltd. -
Page 7: Instructions
Air will vent from the valve as the unit submerges. To submerge the housing further, rotate the valve further. Manufactured by: Scubacam Ltd. Unit 8, Battlerswells Farm, Jackets Lane, Harefield, Middlesex UB9 6PZ Tel: +44 (0)1923 822 872 E Mail: sales@scubacam.net... -
Page 8: Camera Instructions
Camera Body ARRI Plate for Sony Venice 1/2 ARRI BPA-5 ARRI BP-8 (Or BP-9 for 15mm rods) Manufactured by: Scubacam Ltd. Unit 8, Battlerswells Farm, Jackets Lane, Harefield, Middlesex UB9 6PZ Tel: +44 (0)1923 822 872 E Mail: sales@scubacam.net Website: www.scubacam.net... -
Page 9: Instructions (Accessories)
Can be adjusted to various positions within the housing using a 4mm allen key. Replacements screws MUST BE M6x12 Socket Countersunk A4 SS Manufactured by: Scubacam Ltd. Unit 8, Battlerswells Farm, Jackets Lane, Harefield, Middlesex UB9 6PZ Tel: +44 (0)1923 822 872 E Mail: sales@scubacam.net... -
Page 10: List Of Parts
Ethernet Cable On-board HD Monitor Pistol On/Off grip Wrap around handle Air jet system French flag Manufactured by: Scubacam Ltd. Unit 8, Battlerswells Farm, Jackets Lane, Harefield, Middlesex UB9 6PZ Tel: +44 (0)1923 822 872 E Mail: sales@scubacam.net Website: www.scubacam.net... -
Page 11: Maintenance Products
Maintenance Products When a Scubacam splash housing is sold, we supply the following products to help maintain the splash housing: Zip wax: The zip wax is part of a two-part process to protect the zip against the elements. At the end of the day, prior to storing the unit, clean the zipper with fresh water and brush off any debris. -
Page 12: Limited One-Year Warranty
Limited One-Year Warranty Scubacam Ltd. warrants that for a period of one year from the date of purchase your Scubacam housing will be free from defects in materials and workmanship UNDER NORMAL USE and following manufacturer’s instructions for maintenance. This warranty extends only to the original purchaser.
Need help?
Do you have a question about the SCU-30 and is the answer not in the manual?
Questions and answers