Table of Contents
Advertisement
Quick Links
Wireless Thermostat
Digital Room Thermostat for the BCM:Connect
Pack Contains: 1x Wireless Thermostat, 1x Receiver
Device Information
Wireless Thermostat
Model: WTA
Wireless Thermostat Power: 2x AAA Batteries
Receiver Boiler Connection: 0-24V DC
Receiver Supply Connection: 230V AC
Made in China
Vericon Systems
Unit 5, Churchill Industrial Estate,
Churchill Road, Cheltenham,
GL53 7EG
www.vericonsystems.com
Support: support@vericonsystems.com
Safety and Guidelines
The BCM:Connect (BCM) and Wireless Thermostat
should only be installed by a competent person.
ALWAYS ISOLATE THE MAINS
SUPPLY BEFORE INSTALLING
!
OR WORKING ON ANY
COMPONENTS THAT REQUIRE
A 230V AC SUPPLY
The Wireless Thermostat is intended for internal use
only and requires a BCM to operate.
The Wireless Thermostat has a range of 120m in an
open space from the receiver.
The Receiver should be installed next to the BCM.
Compatibility
The Wireless Thermostat is designed to work with the
BCM:Connect
For more information on the BCM:Connect visit;
www.vericonsystems.com/bcmconnect
The thermostat is to be installed during the installation
of the BCM:Connect.
If your BCM:Connect is already installed, re-scan the QR code and follow
the online portal through to reinstall the device with the Thermostat ena-
bled
1. Ensure the mains supply is isolated
ALWAYS ISOLATE THE MAINS
SUPPLY BEFORE INSTALLING
!
OR WORKING ON ANY
COMPONENTS THAT REQUIRE
A 230V AC SUPPLY
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Vericon Systems WTA
- Page 1 The thermostat is to be installed during the installation Wireless Thermostat of the BCM:Connect. Model: WTA If your BCM:Connect is already installed, re-scan the QR code and follow the online portal through to reinstall the device with the Thermostat ena-...
- Page 2 Installation Installation 7. Once the BCM is installed, put batteries in the ther- 2. Remove any existing thermostats and add a link mostat wire into the room stat connections on the boiler 8. Next, the receiver and thermostat will need pairing 3.
- Page 3 Display and Buttons Current Programming Period Manual Mode Weekday Number Signal Wireless Thermostat Clock Indicator Digital Room Thermostat for the BCM:Connect Heating on Icon Setting the Clock and Weekday Press and hold the M button for 3 seconds. Set the minute, hour and weekday number by rotating the dial and pressing M to set the value and moving to the next value By clicking the dial button, it will return to the home...
- Page 4 Pairing Parameter Setting Hold the top button down on the receiver until the To enter parameter settings, press the dial button to top LED is flashing quickly turn the thermostat screen off and hold the dial but- ton for 6 seconds. Hold down the dial on the thermostat until a the code Adjust the value using the dial, and move to the next shows on the screen...
Need help?
Do you have a question about the WTA and is the answer not in the manual?
Questions and answers