anko 43140169 Instruction Manual
  1. Manuals
  2. Brands
  3. anko Manuals
  4. Bottle Warmer
  5. 43140169
  6. Instruction manual

anko 43140169 Instruction Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

BOTTLE WARMER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 43140169 and is the answer not in the manual?

Questions and answers

Summary of Contents for anko 43140169

  • Page 1 BOTTLE WARMER...

  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS When using the electrical appliance, the below basic safety precautions should be followed: 1. Before use, check that the voltage power corresponds to that which is shown on the appliance nameplate. 2. Do not operate this appliance if it has a damaged cord or plug, or after the appliance has malfunctioned.
  • Page 3 cord in water or any other liquid. 21. To prevent injury to the child, test temperature of contents before giving bottle to your child! heating baby food, always test temperature before feeding your child. instructions. 24. This appliance is intended to be used in and similar such as: –...

  • Page 4: Control Panel

    KNOW YOUR BOTTLE WARMER Bottle stand CONTROL PANEL EXPLANATION OF SETTINGS Off setting: The bottle warmer is switched off and the power indicator light is off. Defrost setting: Defrost a bottle of milk or baby food to liquid state. No warming will occur.

  • Page 5: Before First Use

    BEFORE FIRST USE  Unpack all the packing materials and dispose of properly.  Before using the bottle warmer, it is strongly advisable to clean all parts thoroughly. Refer to the “CLEANING AND MAINTENANCE” section for instructions. USING THE BOTTLE WARMER •...
  • Page 6 IMPORTANT!  For hygiene reasons, food should not be kept warm for more than 20 minutes.  Do not warm milk for too long, otherwise the milk will be overheated.  ALWAYS shake bottle / stir food well to ensure even heat distribution and test temperature of contents before giving bottle to child.

  • Page 7: Cleaning And Maintenance

    Using the bottle warmer with the Sterilise setting 1. Insert the plug to the mains power socket outlet. 2. Place the empty milk bottle, teat and lid upside down into the bottle warmer (Fig.3). 3. Pour 50-80ml of distilled water into the bottle warmer, then place the bottle warmer lid into position as per diagram (Fig.4).
  • Page 8 DESCALING It is recommended to descale the bottle warmer every four weeks to ensure it continues to work efficiently. 1. Mix 10g of citric acid cleaner / white vinegar with 200ml of cold water to descale the bottle warmer. 2. Turn on the bottle warmer, select the Sterilise setting and operate for 10 minutes.
  • Page 9 43140169...

Table of Contents