Galaxie GA-40 Owner's Manual page 14

Muffler insTallaTiOn
before installing muffler, be sure that it is preceded by at least 36 inches
(91 cm) of metal piping.
1. Insert the rubber coupling on the vacuum air exhausts or pipe.
2. Using a Phillips screwdriver, tighten the clamp collar to ensure
adequate sealing.
* To be vented outside
cautIon: When power unit is operational, metal exhaust pipe can become very
hot; that's why we recommend that you install the provided rubber sleeve on it.
14
36" • 91 cm
Glue not included
36" • 91 cm
Installation
(Ga-240 MOdel)
To outdoors
PVC
Glue not included
PVC
Metal