Download Print this page

TEXONIC PX Series Instruction Manual

White velvet frame fixed projector screen

Table of Contents

Download this manual

White Velvet Frame Fixed

Projector Screen

PX Series

Black Velvet Finish

The TEXONIC ﬁxed frame projector screens allow you to create the perfect professional

home cinema. It is enclosed in an aKracLve velvet wrapped lightweight aluminum frame.

Compared to a lot of the ﬁxed frames in the market we insure to produce one aluminum

frame per side. To avoid any sagging or distorLon to the frame. The screen is simple to

assemble with the adjustable fabric spring system. The tension springs along with the ﬁxing

lugs stretching and Lghtening the fabric to make the screen surface completely ﬂat and

wrinkle-free.

The PX screen fabric material is durable and easy to clean with wet cloth. It has a high quality

coaLng which projects colourful images beauLfully. No maKer where you are siRng the

projecLon is balanced throughout the room from any angle. We highly recommend this

screen to the movie enthusiasts.

Available in 100" & 120"

Instruction Manual

Table of Contents

Need help?

Do you have a question about the PX Series and is the answer not in the manual?

Page 1 Black Velvet Finish Available in 100” & 120” The TEXONIC ﬁxed frame projector screens allow you to create the perfect professional home cinema. It is enclosed in an aKracLve velvet wrapped lightweight aluminum frame. Compared to a lot of the ﬁxed frames in the market we insure to produce one aluminum frame per side.
Page 2   What is included Make sure all hardware is inside before proceeding with the installation x 80 100” x 100 120” Tools required Step 1 Place a soft-clean cloth on the ground or other flat surfaces of the area where the screen will be assembled. Carefully take everything out of the box and neatly place it on the cloth.
Page 3   Step 2 Connect A to the ends of the long frames. Do no tighten completely until all frame pieces are assembled together correctly. Step 3 As shown in the diagram below. Now connect the small frames to the long frame. After it’s been inserted securely, you may now go in and connect A to the small frame and tighten it in place.
Page 4 Step 5 Gently place the assembled unit face down on a clean surface as shown in the image below. 1) Using the tool F install the springs (B) to the four frame corners and fabric ends ﬁrst. 2) Then place the supporLng bar (E) in the middle area of the screen for extra support.