BaltLED CRANELUX LUMINAIRES Installation Manual

CRANELUX LUMINAIRES
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING

WARNING

! Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
• Perform installation in dry location only.
• Luminaire may fall down if not installed properly.
• Avoid direct eye exposure to the light source while it is on.
• Do not operate luminaire with damaged parts.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• The manufacturer shall not be liable for any damage resulting from inappropriate modifications to the luminaire
or faulty installation.
If you have any questions, contact the manufacturer.

WIRING

1. Connect supply wires to luminaire wire leads per the wiring diagram using methods that comply with all
applicable codes.
2. Turn power on.
Class II Standart
Neutral
Ground
Phase
© 2022, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
1 /
www.baltled.com
2
th
January 15 , 2022
INSTALLATION GUIDE
Blue
Brown
LIGHT