Subscribe to Our Youtube Channel
Related Manuals for KME NEVO-SKY
Summary of Contents for KME NEVO-SKY
- Page 1 LPG/CNG autogas systems USER MANUAL OF A CAR WITH GAS INJECTION SYSTEM DIEGO wer. 02.12.2022 www.kme.eu...
- Page 2 LPG/CNG autogas systems THANK YOU! Thank you for choosing our product. The highest quality system has been installed in your car. Its reliable use requires compliance with the rules which we brie y outline in this study. www.kme.eu...
-
Page 3: Practical Advices
ELECTRONICS: NEVO SKY / NEVO / DIEGO CONTROL PANEL We control the LPG installation using one of the available control panels: DG8 Compact, DG7 RGB, DG5, DG4 [for NEVO-SKY and NEVO family systems] or DIEGO G3 [for DIEGO family systems]. R G B COMPACT... -
Page 4: Starting The Engine
LPG/CNG STARTING THE ENGINE Vehicle equipped with NEVO-SKY / NEVO / DIEGO system normally starts on gasoline. Switching to gas fuel supply occurs automatically after obtaining the relevant parameters, selected during the calibration of the system, such as: · coolant / reducer temperature ·... - Page 5 LPG/CNG CONTROL PANEL COMPACT WORK ON PETROL LED is not shining WAITING WORK ON PETROL WITH AUTOMATIC RETURN TO GAS LED is ashing, optionally signaling the temperature to be switched or the gas level in the tank WORK ON GAS LED is shining, showing gas level, depending on the degree of lling the gas tank [see table - page 4]...
- Page 6 LPG/CNG CONTROL PANEL R G B WORK ON PETROL backlight LED is shining or not WAITING WORK ON PETROL WITH AUTOMATIC RETURN TO GAS one status LED is ashing * and backlight LED is shining or not * and optionally gas level LEDs are ashing, signaling the temperature to be switched —...
- Page 7 LPG/CNG CONTROL PANEL WORK ON PETROL gas system is completely shut down, the panel is completely blank - NO LED IS FLASHING WAITING WORK ON PETROL WITH AUTOMATIC RETURN TO GAS one status LED is ashing and gas level LEDs are ashing, optionally signaling the temperature to be switched —...
- Page 8 LPG/CNG CONTROL PANEL WORK ON PETROL gas system is completely shut down, the panel is completely blank - NO LED IS FLASHING WAITING WORK ON PETROL WITH AUTOMATIC RETURN TO GAS one status LED is ashing and ashing gas level LED indicator, indicates reducer heating progress - from 1 to 4 diodes LEDs [1 - low temperature, 4 - achieved switching temperature] WORK ON GAS one status LED is shining * and gas level LEDs are on,...
- Page 9 11. Wait approx. 5 seconds until the panel stops signa- ling the indicator calibration mode. 12. Calibration complete. only controlers from NEVO-SKY and NEVO family from version 4.0D controlers from NEVO family to version 4.0H It is possible to exit from the automatic calibration gas level indicator by...
- Page 10 LEDs (in DG8 the indicator LED changes color) together with an acoustic signal. In the NEVO / NEVO-SKY system, errors are additionally displayed on the gas level indicator diodes in the tank (if this option is activated in the software). The most common cause of the error signaling is the lack of gas in the tank.
- Page 11 While waiting for the switching, the gas level diodes can display the time to switch to gas or the gas level in the tank (only for the NEVO-SKY family). A selection of these functions is available in the software. It is not possible to select two functions at the same time.
- Page 12 LPG/CNG EMERGENCY START ON GAS In case of petrol fuel system failure installed NEVO-SKY / NEVO / DIEGO G3 system allows you to start the engine directly on the gas. In order to start the engine on emergency mode you should: 1.
Need help?
Do you have a question about the NEVO-SKY and is the answer not in the manual?
Questions and answers