Advertisement
EN
This manual contains important information that should be kept
for future reference.
For domestic use only.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Materials
Lightweight boards oak veneer.
Assembly Instructions
In order not to lose components, do not throw the pack-aging
before completing the full assembly.
Before beginning assembly, identify all the components using the
manual.
This product must be assembled by an adult.
Plan to assemble the product as close as possible to where it will
be installed.
Assemble on a clean, flat surface.
Do not use an electric screwdriver.
The product cannot be assembled more than one time.
Warning! Before drilling, make sure that no pipes or cables will
be present in the drilling area. Fix the product to the wall to
ensure its stability. Use the type of screws and wall plugs for the
supporting material.
With time, the bindings can lose their effectiveness. Regularly
check the tightening of screws. If necessary tighten.
Recommendations for use
This product is designed for indoor use only.
Do not climb the product.
Do not overload shelves.
Check the proper assembly before each use.
The wood-based products, particle board, painted, var-nished
and / or lacquers may emit an odor when opened. This smell
disappears after a few weeks if the room is properly ventilated.
Maintenance
In order not to damage the surface,do not deposit hot or wet items
directly.
Do not use magazines or newspapers as a mat. The ink used may
leave traces that can permanently stain the furniture surface.
To avoid the appearance of marks, do not leave stationary object
for more than 2 months.
Avoid placing the product close to a heater or an air conditioner.
The heat and humidity can cause cracks or deformation. Wipe up
spills immediately with a cloth. Then wipe the surface with a clean
dry cloth.
The use of special products for furniture is not necessary or
recommended.
Clean the veneer with a soft, damp cloth. Then wipe with a dry
cloth.
Do not use abrasive products.
Meet with movements within the wood fibers way.
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
Genna - 12/2022
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2
Advertisement
