Download Print this page

Flexson FLXPBCM1022 Instructions

Cantilever wall mount system for tv and sonos playbar speaker

Advertisement

Quick Links

Instructions for FLXPBCM1022
cantilever wall mount system for
TV and SONOS Playbar Speaker
1
1A Use location '1' to mount the bracket level horizontally, mark up other fixing points and remove bracket.
1B Drill other positions, re-fit and secure bracket to the wall.
Note Use all available fixing points.
1
3
3A Insert correct length bolts from your universal kit with a metal washer through TV mounting arm and spacers if required.
Note If you need to reduce the length of a bolt you can add a stepped washer behind the bolt head (Fig 3A).
3B Insert adjustment arms for Playbar mount into the TV mounting arms with the static nuts towards the outside (Fig 3B)
3C Insert x2 assembly bolts and metal washers in to each arm (Fig 3C).
Assembly Kit
40Kg Max
A - M6 assembly
B - M6 washer
55" Max TV size
bolt
X8
X8
2
2A Carefully lay your TV face down on a secure and level surface.
2B Select correct fixing kit for your TV by test fitting a bolt from each kit in your TV fixing points before proceeding.
2C Lay TV mounting arms on to the back of TV over fixing holes (Fig 2C).
2D Position the mounting arms as close to the bottom of the TV as possible (Fig 2D).
2E So that the TV and PLAYBAR sit flush the mounting-face of the TV mounting arms need to be level with the PLAYBAR (Fig 2E).
2F Insert spacers from your universal kit between the mounting arms until the they and the PLAYBAR are level (Fig 2F).
Note SONOS PLAYBAR is 83mm deep.
3A
Fixing bolt
M6/M8
4
4A Two persons should lift TV up and hook TV mounting arms over the horizontal rail on the TV wall mount (Fig 4A).
Stepped
4B Insert two safety screws to secure TV on to the wall mount (Fig 4B).
washer
4C Attach Playbar mounting plate to lower arms (Fig 4C)
M6/M8
4D Centre the mounting plate before tightening fully (Fig 4D).
Washer
M6/M8
Note: Insert if
required.
Bx4
Ax4
3C
3B
C - M5 security
D - M4/M5/M6 Allen key
D - M6 x 20mm /
screw
50mm / 80mm
X2
X4
X1
2C
2D
4A
4B
Cx2
Ax4
M6 Universal fixing kit
E - M6 stepped
F - M6 spacers
G - M6 washer
H - M8 x 20mm /
washer
5mm / 15mm
50mm / 80mm
X8
X8
X4
X4
2E
TV
Level surface
2F
Level surface
4C
Bx4
M8 Universal fixing kit
I - M8 stepped
K - M8 washer
J - M8 spacers
washer
6mm /12.5mm / 20mm
X8
X8
X4
TV mounting arm
SONOS
PLAYBAR
Spacer(s)
M6/M8
Centre
4D
Centre

Advertisement

loading

Summary of Contents for Flexson FLXPBCM1022

  • Page 1 5mm / 15mm 50mm / 80mm washer 6mm /12.5mm / 20mm Instructions for FLXPBCM1022 cantilever wall mount system for TV and SONOS Playbar Speaker 1A Use location ‘1' to mount the bracket level horizontally, mark up other fixing points and remove bracket.
  • Page 2 1A Am Punkt '1' die Halterungsebene horizontal montieren, die anderen Befestigungspunkte markieren und Klammer entfernen. 1A Gebruik locatie '1' om het muurbevestigingsframe horizontaal uit te passen, markeer de andere bevestigingspunten en verwijder het frame. 5A Mount Playbar, ensure pin is fully secure within keyhole slot (Fig 5A). 1B Andere Positionen bohren, Klammer anpassen und an Wand befestigen.