KEKAI AKITA TOTEM Manual page 8

Assembly Instructions
IMPORTANT! - Remove any packaging before use, but retain the safety
instructions and store them with this product.
Please do not tighten the screws until they are fully assembled.
B
H
BB
H
Step 1: Attach the bottom support 1 X (G) and 3 X (H) to the panel 3 X (B) and bottom tray 1 X (A) using bolts
22 X (BB) and nuts 22 X (DD).
Please noted, the bottom tray (A) is the innermost, then the side panels (B), and the support frame (G,H) is the
outermost.
Step 2: Attach the lock 1 X (K) in the door panel (C) using bolts 1 X (AA) and nuts 1X (DD), then attach the door
panel (C) to the frame (G). Attach bolt 1X(AA) and nuts 1X (DD) in the support frame (H).
Step 3: Connect the middle support frame 4 X (I), bottom support frame, bottome panel and door using bolts 8 X (BB)
and nuts 8 X (DD), please noted that these bolts and nuts is pre-assembed in step 1.
Step 4: Connect the top support frame 2 X (J), small panel 1 x (D) and middle support frame using bolts 8 X (BB) and
nuts 8 X (DD).
H
B
B
DD
G
A
I
AA
K
C
AA
J