Summary of Contents for DMT 101744
- Page 1 USER MANUAL ENGLISH Perimeter Bracket for Premiere Series Product code: 101744 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 Perimeter Bracket for Premiere Series Preface Thank you for purchasing this DMT product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Working Load Limit ............................17 Inspection and Maintenance .......................... 17 Inspection ................................17 Corrective Maintenance ..........................17 Basic Cleaning Instructions ..........................18 Deinstallation, Transportation and Storage ....................18 Instructions for Deinstallation ..........................18 Instructions for Transportation ........................18 Storage ................................18 Disposal ................................18 Compliance ............................... 18 Product code: 101744... -
Page 4: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: DMT Perimeter Bracket for Premiere Series 4 x M10 mounting screws User manual Fig. 01 Intended Use This device is intended for professional use as a perimeter bracket for the Premiere LED panel series. -
Page 5: Symbols On The Information Label
Do not modify the device. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. ● Use the device only in environments with an ambient temperature between -10 °C and 55 °C. Product code: 101744... -
Page 6: Requirements For The User
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons that may have access to the device or who may be in the vicinity of the device. Product code: 101744... -
Page 7: Description Of The Device
Perimeter Bracket for Premiere Series Description of the Device The Perimeter Bracket shall be used for installation of the DMT Premiere LED panels as perimeter screens. The device has 7 inclination angle settings. Overview A) Top frame (see 3.2. Top Frame) B) Premiere LED panel (not included) C) Bottom frame (see 3.3. -
Page 8: Bottom Frame
4 x mounting pin (for Premiere LED panel) 2 x mounting pin opening (for the rear frame) Rear Frame Fig. 05 Extension tube mounting opening Adjustable foot 2 x mounting pin (for the bottom frame) 2 x spring-loaded fast-lock Product code: 101744... -
Page 9: Extension Tube
647 x 998 x 1199 mm (LxWxH) Weight: 9,81 kg Mechanical: Locking system: Spring-loaded fast-lock Maximum stacking height: WLL: 60 kg Construction: Material: Aluminum Color: Black IP rating: IP54 Thermal: Ambient temperature t From -10 °C to 55 °C Product code: 101744... -
Page 10: Dimensions
Installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing. Personal Protective Equipment During installation and rigging wear personal protective equipment in compliance with the national and site-specific regulations. Product code: 101744... -
Page 11: Installation
Push the spring-loaded fast-locks (14) and turn them by 90˚ clockwise or counterclockwise (Fig. 09). Make sure that the pins are firmly locked. Turn the locking levers clockwise to tighten the rear frame (D) to the bottom frame (C) (Fig. 10). Fig. 09 Fig. 10 Product code: 101744... -
Page 12: Installing The Extension Tube
Put the spring-loaded pin (18) through the extension tube mounting opening (11) of the rear frame (D) and the lower opening of the extension tube (E) (Fig. 12). Fig. 12 Release the button of the spring-loaded pin (18). Product code: 101744... -
Page 13: Installing The Premiere Led Panel
Push the spring-loaded fast-locks of the Premiere LED panel and turn them by 90˚ clockwise or counterclockwise (Fig. 14). Make sure that the pins are firmly locked. Turn the locking levers counterclockwise to tighten the Premiere LED panel to the bottom frame (C) (Fig. 15). Fig. 14 Fig. 15 Product code: 101744... -
Page 14: Installing The Top Frame
4 pin openings (04) of the top frame (A) (Fig. 16). Fig. 16 Use the supplied 4 M10 screws and washers to attach the top frame (A) to the Premiere LED panel. Fig. 17 Product code: 101744... -
Page 15: Connecting The Extension Tube To The Top Frame
Put the spring-loaded pin (15) through the extension tube mounting opening (03) of the top frame (A) and the upper opening of the extension tube (E) (Fig. 20). Fig. 20 Release the button of the spring-loaded pin (15). Product code: 101744... -
Page 16: Inclination Angle Adjustment
Slide the inner part of the extension tube (E) in or out to tilt the Premiere LED panel to one of the following 7 inclination angles: Fig. 22 Push and hold down the button of the inclination angle spring-loaded fast-lock (17) (Fig. 23). Fig. 23 Product code: 101744... -
Page 17: Height Adjustment
Turn screw F of the adjustable feet (08/12) clockwise or counterclockwise to adjust the length of the feet, as shown in Fig. 25. Turn screw G clockwise until it reaches the bottom of the Perimeter Bracket, as shown in Fig. 26. Fig. 25 Fig. 26 Product code: 101744... -
Page 18: Working Load Limit
● Do not use the device if it is damaged. Corrective Maintenance ● Do not modify the device. ● Refer repairs and servicing to skilled persons. Contact your Highlite International dealer for more information. Product code: 101744... -
Page 19: Basic Cleaning Instructions
Store the device in a dry, ventilated environment to avoid corrosion. Disposal After the device is removed from service it can be disposed of as scrap. Compliance Check the respective product page on the website of Highlite International (www.highlite.com) for an available declaration of conformity. Product code: 101744... - Page 20 ©2023 DMT...
Need help?
Do you have a question about the 101744 and is the answer not in the manual?
Questions and answers