Advertisement
Fig.9
7.7.3. Assembly (both white and black keys)
(Step1)
Insert the front part of the key into the chassis.
(Step2)
Insert the plate spring into the hammer notch (refer to
Fig.10
).
(Step3)
While slowly lowering the key into the chassis, insert the plate spring into the notch at the rear
of the key (refer to
Fig.10
).
(Step4)
Carefully insert the key into the opening in the chassis and slide the key towards the rear to
lock it in place (refer to
Fig.10
).
Fig.10
7.8. Disassembly of the pedal assembly
Advertisement
