Advertisement
Assembly
Assembling the Animated Spider
FIG.1
Step 1. Insert the rod at the end of each Leg (B) into the matching hole on the Body of Spider (A)
and secure together with the Cotter Pin [C]. (FIG.1)
Step 2. Insert Ground Stakes (D) into the matching holes in the stands and secure into the ground.
(FIG.1)
Pre-Operation
CAUTION:
Grasp the plug to insert or remove from the power source. Do
not unplug by pulling on cord.
CAUTION:
The lighting string on this product is rated at 33.6 Watts (0.28
Amps) for Spider. Do not overload. Do not connect to another lighting string, decorative
outfit or other product. Before you use or re-use this product inspect it carefully. Return
the product to place of purchase with receipt if the product has cuts, damage, frayed wire
insulation on cords, cracks in the socket enclosures, loose connections or exposed
copper wire.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the product
is placed somewhere other than the ground it should be well secured and stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
Advertisement
