Scotts S20505 Operator's Manual page 9

PLUG
CONNECTING THE POLES
See Figure 2.
 Insert the plug on the intermediate pole into the
socket on the handle pole and push together
until fully seated. The plug is larger on one side
and will only install one way.
 Lower the collar on the handle pole to the
threaded base on the intermediate pole and
rotate clockwise to secure.
 Repeat this process to attach the intermediate
pole to the cutting head pole.
ASSEMBLY
HANDLE
POLE
INTERMEDIATE POLE
THREADED BASE
THREADED
BASE
9 — English
COLLAR
CUTTING HEAD
POLE
NOTE: When assembled correctly, handle pole and
cutting head pole should not be able to separate
from intermediate pole when pulled. Repeat above
steps if poles can be separated from intermediate
pole.
WARNING:
Failure to securely assemble and lock all poles
together as directed above could cause the
poles to separate and could result in serious
personal injury or death.
SOCKET
COLLAR
Fig. 2