Bosch Professional GWS 24-180P Original Instructions Manual page 19

Do not touch grinding and cutting discs until they have
u
cooled down. The discs can become very hot while work-
ing.
Release the On/Off switch and set it to the off position
u
when the power supply is interrupted, e. g., in case of
a power failure or when the mains plug is pulled. This
prevents uncontrolled restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials without the use of water.
A separate protective guard for cutting must be used when
cutting with bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
Technical Data
Angle Grinder
Article number
Rated power input
Rated speed
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grind-
ing spindle
Restart protection
Soft start
Overload protection
Weight according to EPTA-Procedure 01:2014
Bosch Power Tools
GWS 24-180 P GWS 24-230 P
3 601 HC2 1.. 3 601 HC3 1..
W 2400
–1
min 8500
mm 180
M 14
mm 25
–
–
–
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) On/off switch
(3) Dust box (GWS 24-180 JZ / GWS 24-230 JZ /
GWS 24-230 PZ)
(4) Auxiliary handle (insulated gripping surface)
(5) Grinding spindle
(6) Protective guard for grinding
(7) Locking screw for protective guard
(8) Mounting flange with O‑ring
a)
(9) Grinding disc
(10) Clamping nut
(11) Two-pin spanner for clamping nut
(12) Quick-clamping nut
a)
(13) Carbide grinding head
(14) Protective guard for cutting
a)
(15) Cutting disc
a)
(16) Hand guard
a)
(17) Spacer discs
a)
(18) Rubber sanding pad
a)
(19) Abrasive disc
a)
(20) Round nut
a)
(21) Cup brush
(22) Extraction guard for cutting with cutting guides
a)
(23) Diamond cutting disc
(24) Handle (insulated gripping surface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 24-180 GWS 24-230
JZ
3 601 HC2 3.. 3 601 HC3 3..
2400 2400
6500 8500
230 180
M 14 M 14
25 25
– ●
– ●
– ●
English | 19
a)
a)
a)
GWS 24-230
JZ PZ
3 601 HC3 4..
2400 2400
6500 6500
230 230
M 14 M 14
25 25
● ●
● ●
● ●
1 609 92A 88Z | (24.10.2022)