SZe CF Player fullHD2.0 Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

CF Player®fullHD2.0

Manual V2.3

Firmware Version 1.0.55

english

Seite 1 von 80

Table of Contents

Need help?

Do you have a question about the CF Player fullHD2.0 and is the answer not in the manual?

Questions and answers

Summary of Contents for SZe CF Player fullHD2.0

Page 2: Table Of Contents
4.1.5. SD Card / USB Storage ............................... 26 4.2. CFPSetup.txt File ............................31 4.2.1. Playback Mode .................................. 32 4.2.2. Video and Audio setup ..............................32 4.2.3. Synchronized Playback ..............................33 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 2 von 80...
Page 3 7.1.2. DMX Recorder ................................... 49 7.1.3. DMX Output ..................................51 8. CuePoints (*.sze Datei) ........................53 8.1. Creating the Cuepoints *.sze file ......................... 53 8.2. Available Commands ..........................53 8.2.1. Pause....................................53 8.2.2. Pause_Hold ..................................53 8.2.3. UDP Message ..................................54 8.2.4.
Page 4 Digital-I/O-Adapter at serial interface ...................... 67 10.7.1. Custom assignment with KeyOff ............................68 10.8. USB Touchscreen ............................. 68 10.8.1. Natively supported Touchscreens ............................ 69 10.8.2. Other Touchscreens................................. 71 10.9. USB Numblock ............................72 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 4 von 80...
Page 5 SZe GmbH. SZe GmbH assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. SZe GmbH makes no commitment to update or keep current the information in this User’s Manual and reserves the right to make improvements to this User’s Manual and/or to the products described in this User’s Manual, at any time without notice.
Page 6: Technical Data
CF Player®fullHD2.0 1. Technical Data 1.1. SUPPORTED FILE FORMATS 1.1.1. VIDEO 1.1.2. IMAGES 1.1.3. AUDIO Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 6 von 80...
Page 9: Hardware Overview
No SD Card or no read access to device • Blue: USB storage recognized. Flashes when reading from device Off: No USB storage or no read access to device Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 9 von 80...
Page 10: Sd Card
2.2.4. Gigabit LAN Port Connect the CF Player® to your local network via the Gigabit RJ45 Port. DHCP will be used per default. This can be changed in the settings. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 10 von 80...
Page 11: Rs232 Serial Port
1. USB Peripheral 2. SPDIF Optical 2.3.1. USB Peripheral USB 2.0 Port to connect external devices: Mouse, Keyboard, Presenter, GPS Antenna, Touchscreens, etc… 2.3.2. SPDIF Optical Digital audio port. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 11 von 80...
Page 13: Using Gpio Contacts
You can reassign other functions to the contacts. Please refer to Chapter (KeyOff) 2.4.2. GPIO Cable The supplied DSUB25 cable can be connected to the GPIO Port. The colour code related to the contact index can be seen in this table: Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 13 von 80...
Page 14: First Steps
Connect a USB Mouse, Touchscreen, or USB Keyboard to one of the USB Ports. Either remove SD Card and USB storage, or press “CTRL+S” on the keyboard. The IP can be set on the Maininfo page. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 14 von 80...
Page 15: Starting The Cf Player®Fullhd2.0
Playback will start in alphanumerical order. After the last file has ended, playback will continue with the first item. If you want to change the playback order, you can create a Playlist. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 15 von 80...
Page 16: Configuration Of The Cf Player®Fullhd2.0
(Content of the SD Card & Playlist Editor) • USB storage (Content of the USB storage & Playlist Editor) • System (Custom name, Security, Reboot, Reset, Update Firmware) • German (Change language to German) Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 16 von 80...
Page 17 IP settings will be provided by DHCP server. Custom values will be ignored. • IP Address • Subnetmask • Gateway • • UDP Port: Default Port is 4950. For Sync Playback, all CF Player®s have to use the same port. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 17 von 80...
Page 18 All you need is to create a file with the exact filename of the video and the file extension and add the special extension “.sze”. Detailed information of the structure of this file can be found in the containing chapter.
Page 19 A log file can be written if activated here. Events like item start, end, break, errors can be logged. • Log Folder Specify a subfolder on the SD Card or USB storage, where the log file will be stored. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 19 von 80...
Page 20: Date & Ftp Setup
At every new boot of the CF Player®. The date and time of the ntp server will be applied • NTP server URL of the NTP server chosen for your time synchronization Synchronize with ntp server now. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 20 von 80...
Page 21: Remote Access
• Interval in seconds Start download every X seconds starting from first date and time. 4.1.3. Remote Access Control the CF Player®fullHD2.0 remotely or retrieve information about current playback. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 21 von 80...
Page 22: Dmx Setup
Pause playback • Next: Jump to next item 4.1.4. DMX Setup 4.1.4.1. DMX Setup • DMX Activation DMX Function deactivated DMX Function activated • DMX Device OPENDMX ENTTEC OPENDMX USB Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 22 von 80...
Page 23 This will start the recording of incoming DMX data. As soon as you press this button, all incoming DMX512 will be recorded into one DMX512 universe. The recording will continue Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 23 von 80...
Page 24 Stop Stops all running DMX Shows. Including those scheduled by Playlist or started by any other input. • Delete Selected DMX file will be deleted. CAUTION: Cannot be undone! Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 24 von 80...
Page 25 • Numblock Num0 to Num9: Number keys of USB Numblock. NumMinus Minus-Key of USB Numblock. NumPlus Plus-Key of USB Numblock • Keys Key1 to Key16 Contacts of Digital-I/O-Adapter cable Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 25 von 80...
Page 26: Sd Card / Usb Storage
IMPORTANT: only working on external browser. Option not visible on display. • Upload Only small files can be uploaded (< 2MB). I.e. PLAYLIST or CFPSetup.txt IMPORTANT: No upload of media files! IMPORTANT: After upload, Reload content must be activated! Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 26 von 80...
Page 27 Click on a name and it will be inserted in PLAYLIST after “Datei=” • ABBRUCHZEIT Displaytime for images or HTML content • NACHFOLGER Successor of this item • LOOP Loop entry for this item Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 27 von 80...
Page 28 Enter / Return • Delete right character The on-screen keyboard has limitations regarding the deletion or navigation in previously existing content of the PLAYLIST. Therefore, the buttons below offer various functions: Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 28 von 80...
Page 29 Firmware Up-To-Date Server Offline Can not contact update server No SD Card or USB storage The Update can only be started with a SD Card or USB storage present Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 29 von 80...
Page 30 CF Player®fullHD2.0 Update Update can be started • Show Changelog Currently only available in german 4.1.5.2.6. Keyboard Shortcuts With a connected USB keyboard, you can use these shortcuts: Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 30 von 80...
Page 31: Cfpsetup.txt File
Webinterface Login Aus Webinterface Benutzername SZe Webinterface Passwort SZe FTP Download Aus FTP Download Server leer FTP Download Benutzername FTP Download Password leer FTP Download Modus passiv FTP Download Datum 1.1.1970 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 31 von 80...
Page 32: Playback Mode
Some displays request a 10 bit Color Space but do only support 8 bit. In case you see a black screen, please set this manually to 8 bit 8 Bit Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 32 von 80...
Page 33: Synchronized Playback
Sync Commands will only be sent on start of an item. Niedrig (Low): Sync will be accurate with a tolerance of +- 1s Mittel (Medium): Sync will be accurate with a tolerance of +- 33ms Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 33 von 80...
Page 34: Network
An ftp server is running on the CF Player®fullHD2.0 that grants you access to the SD Card and USB storage. You can connect with a FTP Client (FileZilla https://filezilla-project.org/ ) and modify the contents Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 34 von 80...
Page 35: Automatic Ftp Download
Start download every 4 weeks starting from first date and time. • FTP Download Intervall in Sekunden (Interval in seconds) Start download every X seconds starting from first date and time. • FTP Download Serverordner (Folder) Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 35 von 80...
Page 36: Log
An (On) Login activated • Webinterface Benutzername Login Username • Webinterface Passwort Login Password IMPORTANT: The password login will be activated only after a reboot of the CF Player® Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 36 von 80...
Page 37: Timecode Commands
All files will be looped in alphanumerical order. Erster (Repeat first): First ITEM will be played in loop. If another ITEM is triggered, it will be played and at the Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 37 von 80...
Page 38: With Playlist (Playlist.txt)
This index defines the position of the item in the overall playback order. First index is 0. Ex.: [ITEM 0] • File=Name Filename incl. file extension. Case sensitive! Spaces in the filename are not permitted. Ex.: File=Film1.mp4 • German: Datei= Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 38 von 80...
Page 39: Optional Parameters
Send an UDP message to the IP xxx.xxx.xxx.xxx and Port PORT Ex.: IP 192.168.0.5 4095 Lamp On Send the message „Lamp On“ to the IP 192.168.0.5 and Port 4095 • RS232 Send a RS232 message via the serial interface Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 39 von 80...
Page 40: Scheduler Playlist
First day that an ITEM is allowed to play Format: dd.mm.yyyy Ex.: Start date=25.05.2018 Don’t play ITEM before 25.5.2018 • End date= Last date the ITEM is allowed to play Format: dd.mm.yyyy Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 40 von 80...
Page 41: Html5 Browser
Content will be displayed permanently. • HTML= Filename of the main file of your HTML5 project. The paths are relative to the root directory of the SD card or USB storage. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 41 von 80...
Page 42 Displaytime=-1 [ITEM 1] File=Movie2.mp4 You can mix HTML content and videos and images in the PLAYLIST.txt. IMPORTANT: The URL must be accessible! Otherwise the ITEM will be skipped instantly. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 42 von 80...
Page 43: Synchronized Playback
The files will be played in alphanumerical order. If you have chosen another Playback Mode, it will define the order. IMPORTANT: Synchronization could fail, if the alphanumerical order of the files is not consistent throughout all players in a Sync Group. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 43 von 80...
Page 44: Integrate Cf Player®S Into A Local Network
All players must be in the same network. Details can be found in Chapter Network Setup. 6.1.5. Sync Options Sync Control On Sync Type Master Sync Accuracy min Sync Group 1 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 44 von 80...
Page 45: Dmx Functions
▪ By touch ▪ By Webinterface ▪ Playback of multiple shows simultaneously. (i.e. Show 1 Channel 5-10, Show 2 Channel 10- 100 …) • DMX Output: Control DMX512 channels Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 45 von 80...
Page 46: Dmx Input
To activate the DMX Input for controlling the CF Player® with DMX Channels or to use the DMX Recorder features, you must set the DMX Input to on: DMX Input On Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 46 von 80...
Page 47: Control By Dmx Channels
As soon as you click somewhere else, the values for the Channels will be calculated and displayed: 7.1.1.2. HDMI Setup You can configure the HDMI Output with the DMX Channel 3 (Channel 12 in the example) The following settings are possible: Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 47 von 80...
Page 48 The Value of X is the value of DMX Channel 11 (Channel 20 in the example). Value 6 shows the Setup Screen on the display. Value 7 shows the Playback on the display. 7.1.1.5. Brightness / Dimmer 7.1.1.6. Playback Speed Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 48 von 80...
Page 49: Dmx Recorder
Also, the total duration in seconds and the number of frames, that the DMX show counts. A frame consists of 512 DMX Channels and their value. Each *.dmx file starts with the line “SZE DMX SHOW”. Followed by the value 2 and then 512 Channel values separated by comma.
Page 50 There are several ways to stop the playback DMX Shows: • Entry in Playlist (Chapter Fehler! Verweisquelle konnte nicht gefunden werden.) All DMX Shows will be stopped when Playback of ITEM starts. • CuePoint in *.sze file (Chapter Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 50 von 80...
Page 51: Dmx Output
7.1.3.2. Send at start of media item by Playlist Add the line with the DMX Command under the ITEM of your choice. Ex.1: [ITEM 0] File=Film1.mp4 DMX_Set 1:255,2:255,3:255,4:255 Ex.2: Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 51 von 80...
Page 52 7.1.3.3. CuePoints by Timecode with *.sze file First the CuePoints must be activated: Cuepoints On A CuePoint-file *.sze must be created as described in Chapter 1. Create a simple text file with the same name as the media file INCLUDING the file extension. Add .sze to the file name.
Page 53: Cuepoints (*.Sze Datei)
8.1. Creating the Cuepoints *.sze file The CF Player will search for a matching .sze file at the beginning of each media item. This file must be named identical to the media item, INCLUDING the filename extension of the item (.mp4,.mp3, jpg…), and have a new filename extension .sze.
Page 54: Udp Message
State: Relay is closed Off: Relay is opened Example @ 00:00:01.500 > Relay R1:On,R2:Off,R7:Off @ 00:00:07.500 > Relay R1-R7:Off @ 00:00:10.500 > Relay R3-R6:On 8.2.6. DMX Commands 8.2.6.1. DMX_Set Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 54 von 80...
Page 55 8.2.6.4. DMX_Show Syntax @ 00:00:01.500 > DMX_Show Showname.dmx Function DMX Show is played back. Parameter Showname: Name of DMX Show including .dmx filename extension. Example @ 00:00:01.500 > DMX_Show Blau_1.dmx Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 55 von 80...
Page 56: Content Update
You can either Drag’n’Drop new files to the right window or right click on a file and select “upload”. IMPORTANT: You must apply any uploads or deletion of files by clicking “Reload Content” on the SD or USB page of the Webinterface. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 56 von 80...
Page 57: Automatic Content Update Via Ftp
9.2.1. With FileList.txt First, the file „FileList.txt” will be downloaded. This file defines the additional operations. Available are: 1. Delete files on SD / USB 2. Download files to SD /USB Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 57 von 80...
Page 58: Without Filelist.txt
During the transfer, the playback will be aborted, and a USB update screen will appear on the display. As soon as all operations are completed, playback will resume with the new files. 10. External Control 10.1. Control via serial RS232-Interface The pin assignment of the DSUB9 connector: Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 58 von 80...
Page 59: Control Via Udp (User Datagram Protocol)
UDP Port. The default Port is 4950 but can be assigned freely (Network). 10.3. Playback Commands 10.3.1. PAUSE Syntax PAUSE Alternative PAUS Function Playback is paused 10.3.2. CONTINUE Syntax CONTINUE Alternative CONT / FORTSETZEN / RESUME / RESU Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 59 von 80...
Page 60: Papl
SD card / USB storage. Example PLAY=2 Playback of ITEM 2 is started 10.3.8. PLAYFILE Syntax PLAYFILE=Filename.fileextension Alternative PLAYDATEI=Filename.fileextension Function Start playback of given file Parameter Filename including file extension Example PLAYFILE=FILM1.mp4 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 60 von 80...
Page 61: Sync (Only Udp)
Current ITEM has a remaining duration of 25 seconds 10.3.13. SPEED= Syntax SPEED=nnn Function Set playback speed Parameter Playback speed in percent Example SPEED=25 Set playback speed to 25% Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 61 von 80...
Page 62: Speed
PLNG x: Sent at start of ITEM. x is the ITEM number of current ITEM. DONE x: Sent at end of ITEM. x is the ITEM number of currently ended ITEM. Example UDPMONITOR=192.168.0.44 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 62 von 80...
Page 63: Udpmonitoroff (Udp Only)
VOLDOWN Function Decrease volume by one step Example VOLDOWN 10.4.3. VOLUME= Syntax VOLUME=nn Function Set the volume Parameter 0 (Mute) to 10 (max) Example VOLUME=8 10.4.4. VOLUME? Syntax VOLUME? Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 63 von 80...
Page 64: Mute
Audiotrack to select Example AUDIOTRACK=3 Third audiotrack is selected 10.4.9. AUDIOTRACK? Syntax AUDIOTRACK? Function Get current audiotrack Example AUDIOTRACK? Example Reply: Audiotrack=1 Current audiotrack is 1. 10.5. File Commands Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 64 von 80...
Page 65: Indexlist
Get content of SD Card or USB Storage Example FOLDERLIST? Example Reply: 1.jpg 2.mp4 PLAYLIST.txt CFPSetup.txt 10.5.5. STARTFTPDOWNLOAD? Syntax STARTFTPDOWNLOAD? Function Start the FTP Download from a FTP Server Example STARTFTPDOWNLOAD? Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 65 von 80...
Page 66: System Commands
10.6.5. OUTPUTOFF Syntax OUTPUTOFF Function Deactivate HDMI output Example OUTPUTOFF 10.6.6. SYNCON Syntax SYNCON Function Synchronized playback is activated Example SYNCON 10.6.7. SYNC_AUS Syntax SYNCOFF Function Synchronized playback is deactivated Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 66 von 80...
Page 67: Digital-I/O-Adapter At Serial Interface
As soon as you connect the red cable to any of the other signals the corresponding command will be sent to the CF Player®. The following table shows the colors of the cable and the corresponding button index: Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 67 von 80...
Page 68: Custom Assignment With Keyoff
With most Touchscreens the CF Player® can be configured by a Touchscreen. Starting from Firmware Version 1.0.40 there is a new setting “Touchscreen” in the Setup. This settings has priority over the selected „USB Type“ Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 68 von 80...
Page 69: Natively Supported Touchscreens
The basic principle is identical, but the touch coordinates can have different values (e.g. 0 – 4095. Or 0 - 65535…). Also, the 0,0 point can be located on the top-right or bottom-right/left. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 69 von 80...
Page 70 Playlist for the example above: [ITEM 0] File=Film1.mp4 T0, 0, 400, 300, 0=PLAY 1 T400, 400, 1600, 600, 0=PLAY 3 [ITEM 1] File=Film2.mp4 T0, 0, 1920, 1080, 0=PLAY 0 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 70 von 80...
Page 71: Other Touchscreens
If no reaction to touch events on the Setup Screen happens, your touchscreen is not supported natively and you must select a different touchscreen mode. Entry in CFPSetup.txt: Touchscreen Raw Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 71 von 80...
Page 72: Usb Numblock
Key 1: ITEM 1 Key 2: ITEM 2 … You can define custom commands to the keys, as described in chapter 10.7.1. [ITEM 1] … KeyOff Num0=0 Num1=1 Num2=2 Num3=3 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 72 von 80...
Page 73: Usb Presenter
Prev (Key25), Next (Key26), Play/Pause (Key27/28), Jump to first Item(Key29) Play/Pause key is toggling Key27 und Key28. Key27 – Klick – Key28 – Klick – Key27 – Klick – Key28 … Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 73 von 80...
Page 74: Usb Gps Antenna
Please contact us for further information, if you are interested in this feature. 10.12. USB RFID Reader You can connect a FID Reader via USB to the CF Player®. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 74 von 80...
Page 75 RFID 04D1821A0A4080 PLAY 3 [ITEM 1] File=Bild2.jpg Displaytime=20 RFID 04AF821A0A4080 PLAY 1 RFID 04D0821A0A4080 PLAY 2 RFID 04D1821A0A4080 PLAY 3 The available commands are equal to the Touch commands. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 75 von 80...
Page 76: Usb Keyboard
These are stored on the SD Card or USB Storage. 10.15.1. “Websites” Folder Create a folder called „Websites“ on the SD Card. Place your HTML and other files inside this folder and optional subfolders. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 76 von 80...
Page 77: Open Url In Browser
Choose the audiotrack of ITEM, if it has more than one Parameter Audiotrack to select Example Command= Audiotrack&Track=nn Third audiotrack is selected 10.15.3.4. Increase volume Syntax Command=VolPlus&Value=nn Function Increase volume by value Example Command=VolPlus&Value=2 Increase volume by two steps Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 77 von 80...
Page 78 <a href="../Commands.php?Command=Jump&Milliseconds=28000"><img src="1.png" /></a> </td> <td> <a href="../Commands.php?Command=Jump&Milliseconds=200"><img src="2.png" /></a> </td> </tr> <tr> <td> <a href="../Commands.php?Command=CustomPlay&PlayID=3"><img src="3.png" /></a> </td> <td> <a href="../Commands.php?Command=CustomPlay&PlayID=4"><img src="4.png" /></a> </td> </tr> </table> </body> </html> Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 78 von 80...
Page 79: Appendix
For the very rare case, that the CF Player® is not working properly at all, even after a factory reset. E.g. Does not boot properly, etc.… You can completely reformat the device. Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 79 von 80...
Page 80: Seite 2 Von
And furthermore, declare that the following parts of standards and documents have been applied: EN61000-6-1 Immunity for residential, commercial and light industrial EN61000-6-3 Emissions for residential, commercial and light industrial SZe Schneider & Zirr engineering GmbH Ledenweg 43A D-01445 Radebeul Radebeul, 18.05.2018 Copyright© SZe GmbH 1994-2018. Alle Rechte vorbehalten. Seite 80 von 80...