Advertisement
Quick Links
ROWENA SINGLE & DOUBLE
ROCKING LOUNGERS
Assembly is easiest using a portable drill.
Please do NOT use a hammer as the screws will break.
It is useful to refer to the photographs in the brochure when assembling your furniture.
Contents
A. 2 x Spine Pieces
B. 3 x Spine Brace Pieces –
17mm x 67mm x 550mm
2. Attach the second spine to the wide slats.
Note: For double fit third spine, ensure spine
screws face inwards.
DON'T FORGET TO PAINT ON THE FURNITURE PROTECTOR AS SOON AS THE
PRODUCT IS ASSEMBLED, UNLESS ANOTHER FINISH IS TO BE APPLIED.
Sustainably Sourced & Ergonomically Designed
ASSEMBLY GUIDE
C. 34 x Seat Slats
2 x Wedges – to fix lounger from rocking
80 x Screws, Torque head bit
1. Lay out a spine section with the screw heads
facing upwards and fit the three wide slats into
the notches on the spine. Once in place fix with
torx head screws.
3. Attach the slats to the spines in-between the
spacing bumps.
www.pepegarden.co.uk
Advertisement
Related Manuals for PEPE ROWENA
Summary of Contents for PEPE ROWENA
- Page 1 ASSEMBLY GUIDE ROWENA SINGLE & DOUBLE ROCKING LOUNGERS Assembly is easiest using a portable drill. Please do NOT use a hammer as the screws will break. It is useful to refer to the photographs in the brochure when assembling your furniture.
- Page 2 ASSEMBLY GUIDE STELLA BENCH RECLINER It is useful to refer to the photographs in the brochure when assembling your furniture. In the unlikely event that you find during assembly that a bolt does not pass through the timber please check for any obstruction. If you find one of the short nails has passed through the hole then this can be cleared using a metal drill bit to drill through the nail.
- Page 3 ASSEMBLY GUIDE NOJATA SUNBED Assembly is easiest using a portable drill. Please do NOT use a hammer as the screws will break. It is useful to refer to the photographs in the brochure when assembling your furniture. 1. Screw the legs to the inside of the front 2.