Lavry Savitr AD-24-200 Quick Start Manual

• Momentary Press
--- Sustained Press
Operation Mode
Edit Mode
Calibration Mode
LED Display Pattern
• Change Meter Illumination
• Low Latency / Best Quality
ON : External Clocking
OFF : Internal Clocking
la vry Sa vitr
∞
LEFT
dBFS - - 50 - 44 -39 -36 -33 -30 -28 -26 -24 -22 -20 -19 -18
RIGHT
ul tra-precision analog to digit al converter
• Select Sample Rate (Internal Mode only)
--- Change Clocking Mode
• Select Soft Saturation Level
• Select MX Mode On/Off
• Change User Control Illumination
Quick Start Guide
Lavry Savitr (AD-24-200)
EDIT Operation Mode
Peak
Set
Enable Lamp OFF
Audio Controls Protected
Enable
AD-24-200
MAIN
176.4 192 EXT
-17 -16 -15 -14 -13 -12 -11 -10 - 9 - 8 -7 - 6 - 5 - 4 - 3 -2 -1 0 88.2 96
44.1 48
--- Press ~3 sec.
Peak
--- Press ~3 sec.
AUX SOFT SAT SPECIAL GAIN
Peak
176.4 192 EXT 6dB Low M
Latency
INPUT
88.2 96 4dB TRIM
L R
44.1 48 2dB MX
S
Increase Gain
Decrease Gain
In EDIT Mode, no changes
to settings occur
until SET is pressed
Idle ~10 sec.
EDIT Edit Mode
Set
Enable Lamp ON
Audio Controls Exposed
Enable
• Refresh Peak Hold
--- Enable/Disable function
• Set all selected options
Required to save changes
EDIT
Set
OFF : Operation Mode
Enable
--- Exit to Operation Mode
--- Enter Edit Mode
Caution:
Rotating beyond the
adjustment range may cause
mechanical damage. (See Manual)
ON : Edit Mode