Rockshell Alpha Manual And Installation Manual

- B O U T I Q U E P E D A L C A S E S -
Manual and installation guide for models:
Alpha, Beta, Beta Max, Gamma, Delta.
Quick start
Lid: Rockshells have lift-off lids that must be used carefully:
Place the pedalcase on a stable level surface and undo the clasp at
the front beneath the handle. Open the lid, then lift upwards with a
gentle pressure towards the hinges at the back of the case. This will
aid hinge movement/geometry.
Take care not to damage the neoprene seal.
To replace the lid, locate the hinge hooks precisely into the hinge
pin from above, then close the lid, again maintaining a gentle
rearwards pressure towards the hinges. Fasten the clasp.
Deck: decks are fixed to the deck supports inside the case using ball
and spring latches, with adjustable tensioners.
To remove, hold beneath the deck at the back with the fingers of
both hands then apply pressure to the base beneath using your
thumbs to release the deck. It will pivot into the front of the case to
reveal the subdeck and can be lifted off.
Take care not to damage the seals on the deck supports.
To replace, fit the deck into the front of the case and lever down
gently to locate the catches, then press firmly to click into place.
ROCKSHELL is a registered UK company.
All intellectual property rights apply.