Table of Contents
Advertisement
Quick Links
Retro Turntable Operation Guide
MJI 1689
Thank you for buying this product. You may already be familiar with using a similar
unit , but please take the time to read these instructions.
Where to put your turntable
It is important that you consider carefully in advance where your turntable will be
situated and make sure that it is:
* On a flat and stable surface with sufficient ventilation
* Away from bright sunlight or heat sources, such as a radiator or naked flame and
lighted candles must not be placed on the turntable
* Not in a humid or very damp place such as a bathroom
Important safety instructions
Please read this instruction manual carefully before attempting to use the turntable
and keep the manual for future reference
The turntable is for indoor use only
Do not move the turntable while it is connected to the mains supply via the adapter
Clean the turntable with a slightly damp cloth and do not use abrasive cleaners
Children should be supervised to ensure that they do not play with the turntable
WARNING: If the flexible cable of the adapter is damaged, it must be replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a
hazard
Advertisement
Table of Contents
Summary of Contents for MJI 1689
- Page 1 Retro Turntable Operation Guide MJI 1689 Thank you for buying this product. You may already be familiar with using a similar unit , but please take the time to read these instructions. Where to put your turntable It is important that you consider carefully in advance where your turntable will be...
- Page 2 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna. ‐Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example‐ use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. ...
- Page 3 General Descriptions: 1.AUX-In(Audio input) 2.Bluetooth light 3.Headphone output 4.Bluetooth 5.Turntable 6.FM Radio 7.AM Radio 8.OFF/ON//VOLUME Knob 9.Adjust the radio manually 10.Speed Selector (33/45/78 RPM) 11. Plastic clip 12. On/Off turntable 13. Automatically lift the joystick's handle 14. Vinyl 15. Stylus...
- Page 4 16. Power 17. Line out(R) 18. Line out(L) OPERATING INSTRUCTIONS 1.) Connection adapter,To turn on the system ‘ON’, rotate the OFF/VOLUME control clockwise until a ‘click’ is heard, and set the Volume to a low level. The backlight remains ‘On’. 2.) Set the Function selector (PH) to PH position.Put vinyl records in a turntable, turn to On mode, open the Plastic clip , then let the handle up, the stick will be raised, the stick moving turntable to vinyl above with your hand gently, then press down the...
- Page 5 A short Bluetooth starting tone can be heard, then the Bluetooth indicator will be flashing. 2. Turn on your Bluetooth device and scan. It will be displayed as “MJI 1689” when discovered by your Bluetooth device. 3. When the unit is paired with your Bluetooth device, you can hear a short tone from the speakers.
- Page 6 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the 1689 and is the answer not in the manual?
Questions and answers