Advertisement
Mounting & Installation
1
Mark Screw Positions
Mark screw positions using the Camera Bracket (AA)
on your wall.
2
Inserting the Mounting Anchors
Drill holes at the marked points if installing on a hard surface
such as concrete or brick. Insert Mounting Anchors (DD) into
holes. You can skip this step if installing on wood or siding.
3
Feeding the cable thru the Camera Bracket
The cable can go through the base slot
of the Camera Bracket (AA) or drill
a hole in the wall if the cable
needs to go through there.
4
Attaching the Camera Bracket
Use the Mounting Screws (CC) to attach the Camera Bracket (AA)
to the wall.
AA
DD
AA
AA
CC
5
Adjust Camera
Use the Hex Key (EE) to loosen the hex screws then
adjust and rotate viewing angle on the
Smart Outdoor Camera (AA).
EE
6
Plug into Wall Outlet
After adjusting, tighten all hex screws. Connect the cable from
the camera to the Power Adapter (BB). Plug the camera into
an outlet or surge protector.
Note: When using outdoors, plug the camera into an outdoor
rated GFCI receptacle with appropriate outdoor cover.
5
Please contact 1-866-326-BULB (2852) for further assistance.
AA
BB
WWW.FEIT.COM
Advertisement
