Summary of Contents for Jepson WRAPAROUND TUBE SANDER 760/40
- Page 1 Instruction Manual WRAPAROUND TUBE SANDER 760/40 Instruction Manual WRAPAROUND TUBE SANDER 760/40 info@drycutter.com www.drycutter.com Page 1 of 10...
-
Page 2: Table Of Contents
Instruction Manual DRUM SANDER 100 Index EG-Conformity Declaration ......2 CONTROLLING THE VARIABLE SPEED6 OPERATION ..........6 Specifications ............ 2 Maintenance and Repair ........7 User Instructions ..........3 Keep Tool Clean ........7 Safety Instructions .......... -
Page 3: User Instructions
Instruction Manual WRAPAROUND TUBE SANDER 760/40 Local working and safety rules and laws must always be User Instructions followed. The same applies to regulations which apply to the environment. Notes for the customer Safety equipment must never by removed or bridged over. - Page 4 Instruction Manual WRAPAROUND TUBE SANDER 760/40 hearing protection used for appropriate conditions will reduce Only use the electric tool when it is in personal injuries. perfect condition from the technical point of view, and only use it for intended purpose while being aware of safety...
-
Page 5: Functional Description
Instruction Manual WRAPAROUND TUBE SANDER 760/40 get into your mouth or eyes, or lay on your skin may promote absorption of harmful material . Always use properly fitting mask approved for the dust explosure and wash exposed areas Warning Caution with soap and water. -
Page 6: Operation: Start And Stop Of The Machine
Instruction Manual WRAPAROUND TUBE SANDER 760/40 Wraparound TUBE SANDER Do not operate this too until you read and understand the entire instruction manual. OPERATION: Start and Stop of the machine Lock button Switch look Guard clamp lever Trigger switch Trigger switch... -
Page 7: Maintenance And Repair
Instruction Manual WRAPAROUND TUBE SANDER 760/40 When using the machine to apply products (compounds, polishes, To replace: waxes, cleaners, etc). always read and follow the manufacturers 1. To inspect or replace brushes, first directions supplied with product. In this case do not run the machine without the drum in contact with work surface. -
Page 8: Standard Accessories
Instruction Manual WRAPAROUND TUBE SANDER 760/40 Standard Accessories 10 arbor spacer discs ( for fitting smaller wheels to the arbor) Optional accessories: Surface Conditioning belt 120 grit Sandpaper belt Sanding Sponge Belt-Fine Page 8 of 10... -
Page 9: Spare Parts - List Of Spare Parts
Instruction Manual WRAPAROUND TUBE SANDER 760/40 Spare parts - List of Spare Parts Part. No. Descriptipn QT'Y WS001 POWER SUPPLY CABLE 0.75 x 2C x 3M WS002 CORD ARMOR WS003 CABLE CLIP WS004 SCREW M4 x 14 WS005 WIRE LEAD... -
Page 10: Spare Parts Drawing
Instruction Manual WRAPAROUND TUBE SANDER 760/40 10 Spare Parts Drawing Page 10 of 10...