Klein Tools 60532 Instructions

ENGLISH
Klein Tools 60532 Cap-Style Hard Hat Earmuffs are designed to work
with all Klein Tools Safety Helmets and Cap-Style Hard Hats* and
intended to provide limited protection from harmful noise.
*Although the earmuffs may fit on other products with universal side slots, Klein
Tools does not guarantee this product will perform to advertised specifications.
The NRR rating was evaluated using 60145 and 60113RL models.
Read, understand, and follow these instructions to ensure safe
operation. Keep these instructions for future reference.
These hearing protectors help reduce exposure to hazardous noise and other
loud sounds. Misuse or failure to wear hearing protection at all times that you
are exposed to noise may result in hearing loss or injury.
• Inspect earmuffs before each use; damage to the earmuffs can reduce noise
reduction performance.
• Improper fit of this device will reduce its effectiveness in attenuating noise.
Consult the FITTING/ADJUSTMENT section for proper fit.
• Avoid overprotection in minimal noise environments: using noise reduction
equipment can reduce awareness of the surrounding environment.
STORAGE: Regularly inspect earmuffs and ear cushions for excessive
wear such as tears and/or visible cracks. Do not reshape the wire arms as
this will cause a loose fit and reduce noise reduction rating.
Replace earmuffs if tears and/or cracks are visible on the shell and/or
cushion. Replace earmuffs if there is a noticeable change in the fit and
no longer seal firmly against your head.
CLEANING: The earmuff shell and cushion can be gently wiped clean with
lukewarm mild soapy water and dried with a soft cloth without rubbing.
Do not submerge earmuffs in water or treat with abrasive cleaners or
solvents.
Find Quality Products Online at:

WARNINGS

MAINTENANCE

GlobalTestSupply
www.
60532
CAP-STYLE HARD
HAT EARMUFFS –
INSTRUCTIONS
1390586 Rev 05/22 A
.com
sales@GlobalTestSupply.com