Thermador MBE Series Installation Manual page 3

Safety
m
APPLIANCE HANDLING SAFETY
SAFETY CODES AND
STANDARDS
ELECTRIC SAFETY
All manuals and user guides at all-guides.com
m
m
Hidden surfaces may have sharp edges.
under appliance.
This appliance complies with one or more of the following Standards:
UL 858, The Standard for the Safety of Household Electric R anges
UL 923, The Standard for the Safety of Microwave Cooking Appliances
UL 507, The Standard for the Safety of Electric Fans
ANSI Z21.1, The American National Standard for Household Cooking Gas
Appliances
CAN/CSA-C22.2 No. 113-M1984 Fans and Ventilators
CAN/CSA-C22.2 No. 61-M89 Household Cooking Ranges
It is the responsibility of the owner and the in staller to determine if additional
requirements and/or standards apply to specific installatio ns.
Before you plug in an electrical cord, be sure all controls are in the OFF position.
Do not plug the microwave into the wall unt il after the installation is complete. This
is to prevent accidentally turning the microwave on during the installation.
For appliances equipped with a cord and plug, do not cut or remove the ground
prong. It must be plugged into a matching grounding type receptacle to avoid
electrical shock. If there is any doubt as to whether the wall receptacle is properly
grounded, the customer should have it checked by a qualif ied electrician.
If required by the National Electrical Code (or Canadian Electrical Code), this
appliance must be installed on a separate branch circuit .
Installer - show the owner the location of the circuit br eaker or fuse. Mark it for
easy reference.
Use caution when reaching behind or
English 1