Advertisement
Quick Links
Advertisement
Summary of Contents for opendesk Studio Desk
- Page 1 Studio Desk Assembly Instructions...
- Page 2 Welcome to your new Opendesk Every piece of Opendesk furniture is made to order by independent local makers. Opendesk makers produce products on-demand using digital fabricators (CNC- machines) combined with traditional craft skills - working from designs contributed by a global community of designers and hosted on opendesk.cc.
- Page 3 Chiseling should not be We recommend using a We recommend the use Dowels are used for the a gentle nudge. Using required on Opendesk standard PVA based wood of Osmo Raw Oil 3044. glueing of two parts a rubber mallet with a furniture.
- Page 4 Type of fit Mallet Fit Press Fit Push Fit Slide Fit - 0.60mm total 0.00mm total + 0.20mm total + 0.50mm total The use of a mallet is The joint is an exact This joint should only This joint should be easy needed to push the part fit.
- Page 5 01 - desk top 08 - left cable tray hook 02 - right leg 09 - right cable tray hook 03 - left leg 10 - cable concealing strip 04 - front brace beam 11 - screw plate 05 - back brace beam 12 - cable cover 06 - cable tray brace 13 - M6 insert - type P insert nut (13mm)
- Page 6 Checklist for Assembly...
- Page 12 Complete Studio Desk Congratulations! Your Studio Desk is now complete. We always love to see the finished product so please share with us what you made on twitter or instagram using @open_desk #openmaking. Thank you again for choosing Opendesk and supporting designers and local makers everywhere!
- Page 13 After Care Advice : looking after your Opendesk furniture Overtime your Opendesk furniture will get some bumps and bruises through use. Small scratches and stains can be rectified by a little bit of sanding and oiling. Start by sanding the damaged surface with some P240 grit sand paper, once the surface is smooth, move to a P320 grit sand paper.
- Page 14 Tel: +44 (0)20 8986 9063 Email: info@opendesk.cc @open_desk...