1. Before installing enclosure, be sure fire
"Ash Disposal" (page 2 ) ALWAYS lift enclosure by s ides, NEVER top bar. Remove
enclosure from box and lean upright against the wall. Remove and save hardware kit
from the box. Remove packing material and any shipping support from under doors.
2. INSTALLING ENCLOSURE – FIG A.,
and Picture C
Remove parts from hardware kit.
•
FIG A. - Put hex
•
bracket. Attach flex bra cket to back of enclosure,
screwing bracket in to proper hole.
TIGHTEN.
Screw thumbscrews into lintel clamps.
•
Put machine screws through slot in flex br acket
•
and screw into lintel clamps. DO NOT TIGHTEN.
Push enclosure firmly against fireplace so it
•
overlaps evenly on both sides.
FIG B. - Attach lintel clamps to fireplace lintel bar
•
and tighten thumbscrews.
Tighten hex screws and mac hine screws. Be
•
sure enclosure is firmly attached to fireplace and
fiberglass is in place.
3. Picture C – Install Top and Bottom Damper
Knobs and Door Handles as seen in
Picture C.
NorthlineExpress.com
INSTALLATION INSTRUCTIONS
is out and fi replace is cool and cl ean. Read
FIG B.
screws
through slot in flex
DO NOT
Picture C
6
http://www.northlineexpress.com
Toll-Free 1-866-667-8454