Powering The Cw9166I-Mr, Cw9164I-Mr With Meraki Ac Adapter; Injector - Cisco Meraki CW91661-MR Hardware Installation Manual

4.2.2.1
Powering the CW9166I‐MR, CW9164I‐MR with the Meraki AC Adapter (sold separately)
1. Plug the power cord into the CW9166I‐MR, CW9164I‐MR and the other end into a wall outlet.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the Eth0 port on the
CW9166I‐MR, CW9164I‐MR.
4.2.2.2 Powering the M410‐MR with the Meraki 802.3at Power over Ethernet Injector (sold
separately)
1. Plug the power cord into the PoE Injector and the other end into wall power.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the "IN" port on the

injector.

3. Route Ethernet cable from the "OUT" port on the injector to the Eth0 port in the cable bay of the
CW9166I‐MR, CW9164I‐MR.
14