Over rider bar for jeep wrangler tj 97 - 06 (4 pages)
Summary of Contents for CARNIVORE 12056-1202
Page 1
Installation Manual: Skid Plate For Ford Bronco '21 - UP #12056-1202 PARTS & REQUIRED TOOLS REQUIRED TOOLS: KIT CONTENT LIST: Safety Glasses Re-use Four Factory Bolts 15MM Socket Ratchet AN AUXILLARY SKID PLATE ADDS EXTRA PROTECTION ON THE TRAIL, BUT IT CAN...
Page 2
A FEW WORDS ABOUT PRODUCT SAFETY: Your Carnivore product is intended to enhance the utility and enjoyment of your off road capable vehicle. Follow safety information and installation recommendations. Throughout these instructions is important safety information that is generally preceded by one of three signal words indicating the relative risk of injury, property damage or adverse consequence.
Page 3
STEP 1 - REMOVING THE FACTORY SKID PLATE FIG 1 FIG 2 Put on safety glasses. Remove six factory M12 bolts with a 15mm socket. (Fig 1) Remove the factory skid plate. (Fig 2) STEP 2 - SKID PLATE INSTALLATION FIG 3 FIG 4 Thread and install four factory M12 bolts with a 15mm socket.
Page 4
(3) years from date of initial retail sale. Carnivore reserves the rights to: (a.) require invoice or other proof your accessory is within the terms of this Limited Warranty as a condition of warranty service and, (b.) make future revisions to this product and...