Table of Contents
Advertisement
Quick Links
GPRS/GPS gps Tracker
LM002 User Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device
smoothly and correctly. Make sure to read this manual carefully before using this product.
Please note that specification and information are subject to changes without prior notice
in this manual. Any change will be integrated in the latest release. The manufacturer
assumes no responsibility for any errors or omissions in this document.
1. Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can
1
Advertisement
Table of Contents
Summary of Contents for LMHOME LM002
- Page 1 GPRS/GPS gps Tracker LM002 User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual.
-
Page 2: Main Functions
locate and monitor any remote targets by SMS or internet. Content Specs Dim. 70*45*20MM Weight 103g Network GPRS 850/1900Mhz Band GSM chip MTK6261D GPS chip U-blox 7020 GPS sensitivity -159dBm GPS accuracy Cold status 45s Time To First Fix Warm status 35s Hot status 1s Work voltage 3.6V~5V DC... -
Page 3: Quick Using
· Add Smart sleep save power Mode · Add AGPS function,receive GPS signals faster · Add waterproof and dust proof · patented product · Add Roll call positioning · Add app set 3. Notices: 1).GPS tracking can be worked outdoor. Must have mobile phone gsm signal and have GPS signal, It can block GPS satellite signal when there are metal or building above the GPS tracker 2).Please make sure GSM 2g SIM card or compatibility 2G GSM network sim card,... - Page 4 3.3 Use mobile phone call the device and hang up or sending message “smslink123456” to sim card in tracker , and respond to a real-time latitude and longitude information as following: Picture (1) have gps signal...
- Page 5 Picture (2) no gps signal Pic(1)：Replied real-time tracking information Lat:22.691789 lon:113.957028: Positioning of the latitude and longitude Speed：000.1: device moving speed. The unit is km/h. Time:06/28/18 03:58 : real-tracking time, the default is London time. You can set a time zone by sms command ...
-
Page 6: Change Password
5 Change Password 5.1 Send SMS “ password+old password+space+new password” to the unit to change the password. For example: send SMS “password123456 888888” to the unit. If succeeded,“password OK” will reply to your cell phone from the device tracker. 5.2 Be sure to keep the new password in mind, you have to upload the software to restore the original setting in case of losing the new password. -
Page 7: Movement Alarm
Alarms 10.1 OVERSPEED ALARM Set up: Send SMS “speed+password+space+080” to the unit(suppose the speed is 80km/h),and it will reply “speed OK!”.When the target moves exceeding 80km/h.the unit will send SMS “speed+080!+Geo-info” to the authorized numbers. It will alarm one time in 3m interval. -
Page 8: Low Battery Alarm
Cancel: Send SMS “nomove+password” to deactivate the movement alarm. 10.3 LOWBATTERY ALARM SMS format: lowbattery+password+space+off（or on） Command: lowbattery123456 off (cancel lowbattery) lowbattery123456 on (lowbattery ok) 10.4 Vibration alarm SMS format: “shock+password ” send the command to the tracker: “shock123456”, the unit will reply “shock ok”... -
Page 9: Check The Vehicle State
authorized number. Settings: When the car stays stable for 3-10 minutes in a place, you will be able to send a text message order "stockade+password, radius #" to the device to set a limit. Once the device is out of limits, the device will send The text message "stockade!+latitude and longitude"... -
Page 10: Ip And Port Setup
13.2 Text the tracker a SMS “APN123456 + Space + your local APN” via a cell phone and if succeeded, the tracker will return the message “APN OK”. 13.3 E.g. Send SMS command “APN123456 CMNET”. If succeeded, “APN OK” is returned by the tracker in SMS. - Page 11 Online Tracking Note: Must set the APN first. Platform : http://www.smartgpshome.com IMEI No. : on the back side of the unit Password: 123456 15.3 APP for Android/iOS “ homegps” Search in the Apple App Store/Google Play Store to install the applications on yourdevice. Select “Log in by IMEI”...
- Page 12 Set IP/DNS adminip123456 IPadress port adminip123456 47.88.137.243 7700 port adminip123456 DNS port adminip123456 www.smartgpshome.com 7700 INSTRUCTION Example REPLY position smslink123456 Get adress Set admin number admin123456 mobile number admin ok Cancel admin number noadmin123456 mobile number noadmin ok Set time zone time zone123456 local time Time zone ok Set time zone(half time zone)
- Page 13 Vibration sensitivity level(1-5, 1 is vibration,1# vibration 1 OK the highest sensitivity, and 5 is the lowest sensitivity.) Check the Vehicle State Check123456 Instructions/Solutions Please check if device has electricity and charge line to be rechargeable Fail to turn on ...
- Page 14 No uploading position time or no GPS signal,reply position is last time. If it Platform position is shows like Pic 2, pls make sure the device can receive the GPS signal difference from the actual normally.in outdoor,and take device to walk around position.
- Page 15 FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Device GPS Smart Tracker (FCC ID: 2A55K-LM002 ) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/.