Page 1
Outpost Vehicle-Mounted Hammock Stand Setup Instructions Table of Contents Outpost Mount Setup........................Page 2 Outpost Setup..........................Page 3 Parts Included Outpost Frame Ball Hitch Mount Hammock Straps Clamp Mounting Hardware Plates Pack What You’ll Need #4 Allen Wrench #5 Allen Wrench Designed in Austin, Texas | Made in China...
Page 2
Max Weight Capacity 350 Lbs. USE HAMMOCK STAND WITH CAUTION. INHERENT RISKS EXIST. Do not modify the stand or hammock in any way; modification may result in failure or injury and will void your lifetime warranty. Outpost Mount Setup Setting up the Outpost Mount Mount one of the clamp Insert the 4 longer hex...
Page 3
Max Weight Capacity 350 Lbs. USE HAMMOCK STAND WITH CAUTION. INHERENT RISKS EXIST. Do not modify the stand or hammock in any way; modification may result in failure or injury and will void your lifetime warranty. Outpost Setup Setting up the Outpost Remove your Outpost Attach the middle section of the structural ridgeline.
Page 4
Page 4 Install the “U” shaped lock pin to secure the Loop the other included strap through the strap bar Outpost to the mount. on the main pivot joint. Loop the one of the included straps through the hole on the hitch receiver.